Resource Management (Marine Pollution) Regulations 1998
You are viewing an older version of this legislation. View the most recent version here.
Reprint
as at 1 July 2005
Resource Management (Marine Pollution) Regulations 1998
(SR 1998/208)
Michael Hardie Boys, Governor-General
Order in Council
At Wellington this 20th day of July 1998
Present:
His Excellency the Governor-General in Council
Note
Changes authorised by section 17C of the Acts and Regulations Publication Act 1989 have been made in this reprint.
A general outline of these changes is set out in the notes at the end of this reprint, together with other explanatory material about this reprint.
These regulations are administered by the Ministry for the Environment.
Pursuant to section 360(1)(a) and (ha) to (hh) of the Resource Management Act 1991, His Excellency the Governor-General, acting by and with the advice and consent of the Executive Council, makes the following regulations.
Contents
Part 1
Definition prescribed for Act
3 Definition of harmful substances
Part 2
Dumping and incineration
4 Dumping of waste or other matter
6 Incineration of waste in marine incineration facility
8 Discharge of substances for purpose of avoiding, remedying, or mitigating oil spill
10 Discharge of noxious liquid substances
11 Discharge of sewage in coastal marine area
12 Discharge of Grade A treated sewage in coastal marine area
12A Discharge of Grade B treated sewage in coastal marine area
15 Discharges made as part of normal operations of ship or offshore installation
16 Regional rules or resource consents for discharges
Schedule 1
Noxious liquid substances
Schedule 2
Substances classified as oil
Schedule 3
Assessment of waste or other matter
Schedule 4
Normal operations of ship or offshore installation
Schedule 5
Grade A sewage treatment systems
Regulations
1 Title and commencement
-
(1) These regulations may be cited as the Resource Management (Marine Pollution) Regulations 1998.
(2) These regulations come into force on 20 August 1998.
2 Interpretation
-
In these regulations, unless the context otherwise requires,—
Act means the Resource Management Act 1991
carrying in bulk means the carriage of a noxious liquid substance in the cargo spaces of a ship without any form of intermediate containment or packaging
clean ballast water means ballast water and contaminants carried in a tank used to carry a noxious liquid substance or oil,—
(a) where the tank has been thoroughly cleaned since last used to carry a noxious liquid substance, and the residue from that cleaning discharged with the tank being emptied; or
(b) where the tank has been thoroughly cleaned since last used to carry oil and the ballast water and contaminants, when discharged, would not contain oil exceeding 15 parts per million
en route means that a ship is under way at sea on a course, or courses
garbage means all kinds of victual, domestic, and operational waste, excluding fresh fish and parts thereof, generated during the normal operation of the ship or offshore installation and liable to be discharged continuously or periodically; but does not include oil, noxious liquid substances, and sewage
Grade A treated sewage means sewage discharged from a treatment system included in Schedule 5 or Schedule 6 that is maintained and operated in good working order and in accordance with any instructions of the system’s manufacturer
Grade B treated sewage means sewage discharged from a treatment system included in Schedule 7 that is maintained and operated in good working order and in accordance with any instructions of the system’s manufacturer
noxious liquid substance means any substance specified in Schedule 1; and includes any mixtures of those substances
oil means petroleum in any form, including crude oil, fuel oil, sludge, oil refuse, and refined petroleum products (other than petrochemicals which are noxious liquid substances); and includes the substances specified in Schedule 2
oil spill has the same meaning as in section 281 of the Maritime Transport Act 1994
plastics includes synthetic ropes, synthetic fishing nets, plastic garbage bags, and incinerator ashes from plastic products that may contain toxic or heavy metal residues
platform drainage means the drainage water from the machinery space on an offshore installation, and—
(a) includes all water and contaminants from generators, fuel tanks, and pumps; but
(b) does not include any water or contaminant from processing, production, or displacement associated with exploration, drilling, or production activities which are undertaken by the offshore installation
segregated ballast water means ballast water and contaminants in a ship’s tank where that tank is completely separated from cargo oil and fuel oil systems and is permanently allocated to the carriage of ballast water or cargoes other than oil or noxious liquid substances
sewage means, in relation to a ship or offshore installation,—
(a) drainage and other wastes from any form of toilet, urinal, or toilet scupper:
(b) drainage from washbasins, washtubs, and scuppers located in any dispensary, sick bay, or other medical premises:
(c) drainage from spaces containing living animals:
(d) waste waters mixed with the drainage and wastes specified in paragraphs (a), (b), or (c).
Regulation 2 Grade A treated sewage: inserted, on 1 July 2002, by regulation 3(1) of the Resource Management (Marine Pollution) Amendment Regulations 2002 (SR 2002/99).
Regulation 2 Grade B treated sewage: inserted, on 1 July 2002, by regulation 3(1) of the Resource Management (Marine Pollution) Amendment Regulations 2002 (SR 2002/99).
Regulation 2 plastics: inserted, on 1 July 2002, by regulation 3(1) of the Resource Management (Marine Pollution) Amendment Regulations 2002 (SR 2002/99).
Regulation 2 treated sewage: revoked, on 1 July 2002, by regulation 3(2) of the Resource Management (Marine Pollution) Amendment Regulations 2002 (SR 2002/99).
Part 1
Definition prescribed for Act
3 Definition of harmful substances
The following substances are harmful substances for the purposes of the definition of the term harmful substances in section 2(1) of the Act:
(a) petroleum in any form, including crude oil, fuel oil, sludge, oil refuse, and refined petroleum products (other than petrochemicals which are noxious liquid substances); and includes the substances specified in Schedule 2:
(b) any substance specified in Schedule 1 and any mixture of those substances if carried in bulk in a ship:
(c) drainage and other wastes from any form of toilet, urinal, or toilet scupper on a ship or offshore installation:
(d) drainage from washbasins, washtubs, and scuppers located in the dispensary, sick bay, or other medical premises of a ship or offshore installation:
(e) drainage from spaces on a ship or offshore installation containing living animals:
(f) waste water from a ship or offshore installation mixed with the drainage and waste specified in paragraphs (c), (d), or (e):
(g) all victual, domestic, and operational waste (other than fresh fish or parts of fresh fish) generated during the normal operations of a ship or offshore installation and liable to be discharged continuously or periodically.
Part 2
Dumping and incineration
4 Dumping of waste or other matter
-
(1) The dumping of waste or other matter, other than the waste or other matter specified in subclauses (2) and (3), in the coastal marine area from any ship, aircraft, or offshore installation is deemed to be a prohibited activity in any regional coastal plan or proposed regional coastal plan.
(2) In the coastal marine area the dumping of the following waste or other matter from any ship, aircraft, or offshore installation is deemed to be a discretionary activity in any regional coastal plan or proposed regional coastal plan:
(a) dredge material:
(b) sewage sludge:
(c) fish processing waste from an onshore facility:
(d) ships and platforms or other man-made structures at sea:
(e) inert, inorganic geological material:
(f) organic materials of natural origin:
(g) bulky items consisting mainly of iron, steel, and concrete.
(3) This clause does not apply to—
(a) the dumping or storage of waste or other matter arising directly from, or related to, the exploration, exploitation, and associated offshore processing of, seabed mineral resources; or
(b) a discharge made in accordance with section 15B of the Act or Part 3 of these regulations.
Regulation 4(2): amended, on 1 July 2002, by regulation 4 of the Resource Management (Marine Pollution) Amendment Regulations 2002 (SR 2002/99).
5 Assessment criteria
-
(1) Every application under section 88 of the Act for a coastal permit to dump any waste or other matter specified in regulation 4(2) must include the information specified in Part 1 of Schedule 3.
(2) The consent authority must, when considering an application under section 88 of the Act for a coastal permit for any waste or other matter specified in regulation 4(2), have regard to the matters set out in Parts 1 and 2 of Schedule 3 in addition to any other requirement of sections 104 and 138A of the Act.
6 Incineration of waste in marine incineration facility
-
(1) The incineration of waste or other matter in any marine incineration facility in the coastal marine area is deemed to be a prohibited activity in any regional coastal plan or proposed regional coastal plan.
(2) This clause does not apply to a discharge made in accordance with section 15B or Part 3 of these regulations.
7 Record keeping
-
(1) Every holder of a coastal permit to carry out an activity that would otherwise contravene section 15A of the Act must keep records describing—
(a) the types and sources of the waste or other matter dumped:
(b) the location of dump sites:
(c) the method of dumping:
(d) the quantity (in cubic metres) of the waste or other matter dumped.
(2) The records for the preceding calendar year must be provided to the Director of Maritime New Zealand before 1 February in each year.
Regulation 7(2): amended, on 1 July 2005, by section 11(4) of the Maritime Transport Amendment Act 2004 (2004 No 98).
Part 3
Control of discharges
8 Discharge of substances for purpose of avoiding, remedying, or mitigating oil spill
-
(1) Any person may, in the coastal marine area, discharge from a ship or offshore installation any substance for the purpose of avoiding, remedying, or mitigating the adverse effects of an oil spill.
9 Discharge of oil
-
(1) Any person may, in the coastal marine area, discharge oil, or mixtures containing oil, from any ship if—
(a) the oil is not derived from the cargo of the ship; and
(b) the ship is proceeding en route; and
(c) the oil content of the discharge before dilution with any other substance does not exceed 15 parts per million.
(2) Any person may, in the coastal marine area, discharge oil, or mixtures containing oil, from an offshore installation, if—
(a) the oil content of the discharge before dilution with any other substance does not exceed 15 parts per million; and
(b) the discharge is platform drainage.
10 Discharge of noxious liquid substances
Any person may, in the coastal marine area, discharge from any ship carrying in bulk a noxious liquid substance, any noxious liquid substance if that noxious liquid substance is part of a discharge of clean ballast water or segregated ballast water.
11 Discharge of sewage in coastal marine area
-
(1) Before 1 July 2000, any person may discharge sewage in the coastal marine area from a ship or offshore installation, unless that discharge is within 500 metres (0.27 nautical miles) of a marine farm.
(2) On or after 1 July 2000, no person may discharge sewage in the coastal marine area from a ship or offshore installation unless that discharge occurs—
(a) more than 500 metres (0.27 nautical miles) seaward from mean high water springs; and
(b) more than 500 metres (0.27 nautical miles) from a marine farm; and
(c) in water depths greater than 5 metres; and
(d) more than 200 metres (0.108 nautical miles) from a marine reserve, except the marine reserve constituted by the Marine Reserve (Kermadec Islands) Order 1990; and
(e) more than 500 metres (0.27 nautical miles) from an area that the Minister of Fisheries has declared by notice in the Gazette to be a mataitai reserve under regulations made under section 186 of the Fisheries Act 1996.
(3) A rule may only be included in a regional coastal plan or a proposed regional coastal plan relating to the discharges under this regulation if—
(a) the rule increases the distances seaward or increases the depth specified in subclause (2) for any harbours, estuaries, embayments, or other parts of a region, or increases the distances from a marine farm, marine reserve, or mataitai reserve specified in subclause (2), for all or any part of the year; and
(b) the rule takes effect on or after 1 July 2000.
Regulation 11(2)(c): amended, on 1 July 2002, by regulation 5(1) of the Resource Management (Marine Pollution) Amendment Regulations 2002 (SR 2002/99).
Regulation 11(2)(d): added, on 1 July 2002, by regulation 5(1) of the Resource Management (Marine Pollution) Amendment Regulations 2002 (SR 2002/99).
Regulation 11(2)(e): added, on 1 July 2002, by regulation 5(1) of the Resource Management (Marine Pollution) Amendment Regulations 2002 (SR 2002/99).
Regulation 11(3)(a): amended, 1 July 2002, by regulation 5(2) of the Resource Management (Marine Pollution) Amendment Regulations 2002 (SR 2002/99).
12 Discharge of Grade A treated sewage in coastal marine area
-
(1) Any person may discharge Grade A treated sewage in the coastal marine area from a ship or offshore installation, but must not discharge it within 100 metres of a marine farm.
(2) Despite subclause (1), a rule may be included in a regional coastal plan or a proposed regional coastal plan if the rule—
(a) relates to discharges of Grade A treated sewage in the internal waters of Fiordland (as defined in section 4 of the Territorial Sea, Contiguous Zone, and Exclusive Economic Zone Act 1977); and
(b) restricts where those discharges may take place, being a distance of at least 100 metres from a marine farm; and
(c) does not relate to vessels operated by the New Zealand Defence Force.
(3) For the purposes of subclause (2), Fiordland means the coastal marine area between Awarua Point and Sandhill Point.
Regulation 12: substituted, on 1 July 2002, by regulation 6 of the Resource Management (Marine Pollution) Amendment Regulations 2002 (SR 2002/99).
12A Discharge of Grade B treated sewage in coastal marine area
-
(1) Any person may discharge Grade B treated sewage in the coastal marine area from a ship or offshore installation, but must not discharge it—
(a) within 500 metres (0.27 nautical miles) of a marine farm; or
(b) within 500 metres (0.27 nautical miles) of an area that the Minister of Fisheries has declared by notice in the Gazette to be a mataitai reserve under regulations made under section 186 of the Fisheries Act 1996.
(2) A rule may only be included in a regional coastal plan or a proposed regional coastal plan relating to discharges under this regulation if the rule does either or both of the following:
-
(a) specifies the distances from mean high-water springs or the depth where those discharges may take place for all or any part of the year, being distances of at least 500 metres (0.27 nautical miles) from—
(i) a marine farm; or
(ii) a mataitai reserve:
(b) increases the distance from a marine farm or a mataitai reserve where those discharges may take place for all or any part of the year, being at a distance of more than 500 metres (0.27 nautical miles).
Regulation 12A: inserted, on 1 July 2002, by regulation 6 of the Resource Management (Marine Pollution) Amendment Regulations 2002 (SR 2002/99).
13 Discharge of garbage
-
(1) The discharge of plastics, dunnage, lining, and packaging materials in the coastal marine area from any ship is prohibited.
(2) Any person may, in the coastal marine area, discharge from any ship garbage (other than those items specified in subclause (1)), including food wastes, paper, rags, glass, metal, bottles, and crockery, if—
(a) the garbage has been comminuted or ground to a particle size of 25 millimetres or less; and
-
(b) the discharge occurs at least—
(i) 5500 metres (3 nautical miles) seaward of the inner limits of the territorial sea; and
(ii) 500 metres (0.27 nautical miles) from any offshore installation.
(3) The discharge of garbage in the coastal marine area from any offshore installation is prohibited.
14 Discharge of ballast water
-
(1) Any person may discharge in the coastal marine area, from a ship or offshore installation, clean ballast water or segregated ballast water.
(2) This regulation does not authorise the discharge of clean ballast water or segregated ballast water in contravention of the Biosecurity Act 1993, regulations made under that Act, or import health standards made under section 20 of that Act.
15 Discharges made as part of normal operations of ship or offshore installation
Any person may discharge, in the coastal marine area, a contaminant that is incidental to, or derived from, or generated during, the operations listed in Schedule 4 as the normal operations of a ship or offshore installation.
Schedule 1 |
Part 1
| Substances | UN No | |
|---|---|---|
| Acetic acid | ||
| Acetic anhydride | 1715 | |
| Acetochlor | ||
| Acetone cyanohydrin | 1541 | |
| Acrylamide solution (50% or less) | 2074 | |
| Acrylic acid | 2218 | |
| Acrylonitrile | 1093 | |
| Adiponitrile | 2205 | |
| Alachlor technical (90% or more) | ||
| Alcohol (C12-C15) poly (1-6) ethoxylates | ||
| Alcohol (C12-C15) poly (7-19) ethoxylates | ||
| Alcohol (C12-C15) poly (20+) ethoxylates | ||
| Alcohol (C6-C17) (secondary) poly (3-6) ethoxylates | ||
| Alcohol (C6-C17) (secondary) poly (7-12) ethoxylates | ||
| Alkanes (C6-C9) | ||
| Alkaryl polyethers (C9-C20) | ||
| Alkyl acrylate-Vinylpyridine copolymer in toluene | ||
| Alkylbenzene, alkylindane, alkylindene mixture (each C12-C17) | ||
| Alkyl (C3-C4) benzenes | ||
| Alkyl (C5-C8) benzenes | ||
| Alkylbenzenesulphonic acid | 2584 2586 |
|
| Alkylbenzenesulphonic acid, sodium salt solution | ||
| Alkyl (C7-C9) nitrates | ||
| Alkyl (C7-C11) phenol poly (4-12) ethoxylate | ||
| Allyl alcohol | 1098 | |
| Allyl chloride | 1100 | |
| Aluminium chloride (30% or less)/Hydrochloric acid (20% or less) solution | ||
| 2-(2-Aminoethoxy) ethanol | 3055 | |
| Aminoethylethanolamine | ||
| N-Aminoethylpiperazine | 2815 | |
| 2-Amino-2-methyl-1-propanol (90% or less) | ||
| Ammonia aqueous (28% or less) | 2672 | |
| Ammonium bisulphite solution (70% or less) | ||
| Ammonium nitrate solution (93% or less) | ||
| Ammonium sulphide solution (45% or less) | 2683 | |
| Ammonium thiocyanate (25% or less)/Ammonium thiosulphate (20% or less) solution | ||
| Ammonium thiosulphate solution (60% or less) | ||
| Amyl acetate (all isomers) | 1104 | |
| Aniline | 1547 | |
| Aviation Alkylates (C8 paraffins and isoparaffins B. Pt. 95–120°C) | ||
| Benzene and mixtures having 10% benzene or more | 1114 | |
| Benzenesulphonyl chloride | 2225 | |
| Benzyl acetate | ||
| Benzyl alcohol | ||
| Benzyl chloride | 1738 | |
| Bromochloromethane | ||
| Butene oligomer | ||
| Butyl acetate (all isomers) | ||
| Butyl acrylate (all isomers) | ||
| Butylamine (all isomers) | ||
| Butylbenzene (all isomers) | 2709 | |
| Butyl benzyl phthalate | ||
| Butyl butyrate (all isomers) | ||
| Butyl/Decyl/Cetyl/Eicosyl methacrylate mixture | ||
| 1,2-Butylene oxide | 3022 | |
| n-Butyl ether | 1149 | |
| Butyl methacrylate | ||
| n-Butyl propionate | 1914 | |
| Butyraldehyde (all isomers) | ||
| Butyric acid | 2820 | |
| Calcium alkyl (C9) phenol sulphide/Polyolefin phosphorosulphide mixture | ||
| Calcium hypochlorite solution (15% or less) | ||
| Calcium hypochlorite solution (more than 15%) | ||
| Calcium long-chain alkyl salicylate (C13+) | ||
| Camphor oil | ||
| Carbolic oil | ||
| Carbon disulphide | 1131 | |
| Carbon tetrachloride | 1846 | |
| Cashew nut shell oil (untreated) | ||
| Chlorinated paraffins (C10-C13) | ||
| Chloroacetic acid (80% or less) | 1750 | |
| Chlorobenzene | 1134 | |
| Chloroform | 1888 | |
| Chlorohydrins (crude) | ||
| 4-Chloro-2-methyl phenoxyacetic acid, dimethylamine salt solution | ||
| o-Chloronitrobenzene | 1578 | |
| 2- or 3- Chloropropionic acid | 2511 | |
| Chlorosulphonic acid | 1754 | |
| m-Chlorotoluene | 2238 | |
| o-Chlorotoluene | 2238 | |
| p-Chlorotoluene | 2238 | |
| Chlorotoluenes (mixed isomers) | 2238 | |
| Coal tar | ||
| Coal tar naphtha solvent | ||
| Coal tar pitch (molten) | ||
| Cobalt naphthenate in solvent naphtha | ||
| Coconut oil fatty acid | ||
| Creosote (coal tar) | ||
| Creosote (wood) | ||
| Cresols (all isomers) | 2076 | |
| Cresylic acid (dephenolized) | ||
| Cresylic acid, sodium salt solution | ||
| Crotonaldehyde | 1143 | |
| 1,5,9-Cyclododecatriene | ||
| Cycloheptane | 2241 | |
| Cyclohexane | 1145 | |
| Cyclohexanone | 1915 | |
| Cyclohexanone, Cyclohexanol mixture | ||
| Cyclohexyl acetate | 2243 | |
| Cyclohexylamine | 2357 | |
| 1,3-Cyclopentadiene dimer (molten) | ||
| Cyclopentane | 1146 | |
| Cyclopentene | 2246 | |
| p-Cymene | 2046 | |
| Decanoic acid | ||
| Decene | ||
| Decyl acetate | ||
| Decyl acrylate | ||
| Decyl alcohol (all isomers) | ||
| Decyloxytetrahydrothiophene dioxide | ||
| Dibromomethane | ||
| Dibutylamine | ||
| Dibutyl hydrogen phosphonate | ||
| Dibutyl phthalate | ||
| Dichlorobenzene (all isomers) | ||
| 3,4-Dichloro-1-butene | ||
| 1,1-Dichloroethane | 2362 | |
| Dichloroethyl ether | ||
| 1,6-Dichlorohexane | ||
| 2,2’-Dichloroisopropyl ether | 2490 | |
| Dichloromethane | 1593 | |
| 2,4-Dichlorophenol | 2021 | |
| 2,4-Dichlorophenoxyacetic acid, diethanolamine salt solution | ||
| 2,4-Dichlorophenoxyacetic acid, dimethylamine salt solution (70% or less) | ||
| 2,4-Dichlorophenoxyacetic acid, triisopropanolamine salt solution | ||
| 1,1-Dichloropropane | ||
| 1,2-Dichloropropane | 1279 | |
| 1,3-Dichloropropane | ||
| 1,3-Dichloropropene | 2047 | |
| Dichloropropene/Dichloropropane mixtures | ||
| 2,2-Dichloropropionic acid | ||
| Diethanolamine | ||
| Diethylamine | 1154 | |
| Diethylaminoethanol | 2686 | |
| 2,6-Diethylaniline | ||
| Diethylbenzene | 2049 | |
| Diethylenetriamine | 2079 | |
| Di-(2-ethylhexyl) phosphoric acid | 1902 | |
| Diethyl phthalate | ||
| Diethyl sulphate | 1594 | |
| Diglycidyl ether of bisphenol A | ||
| Diglycidyl ether of bisphenol F | ||
| Di-n-hexyl adipate | ||
| Diisobutylamine | 2361 | |
| Diisobutylene | 2050 | |
| Diisobutyl phthalate | ||
| Diisopropanolamine | ||
| Diisopropylamine | 1158 | |
| Diisopropylbenzene (all isomers) | ||
| N,N-Dimethylacetamide solution (40% or less) | ||
| Dimethyl adipate | ||
| Dimethylamine solution (45% or less) | 1160 | |
| Dimethylamine solution (greater than 45% but not greater than 55%) | 1160 | |
| Dimethylamine solution (greater than 55% but not greater than 65%) | 1160 | |
| N,N-Dimethylcyclohexylamine | 2264 | |
| Dimethylethanolamine | 2051 | |
| Dimethylformamide | 2265 | |
| Dimethyl glutarate | ||
| Dimethyl hydrogen phosphite | ||
| Dimethyloctanoic acid | ||
| Dimethyl phthalate | ||
| Dimethyl succinate | ||
| Dinitrotoluene (molten) | 1600 | |
| 1,4-Dioxane | 1165 | |
| Dipentene | 2052 | |
| Diphenyl | ||
| Diphenylamine, reaction product with 2,2,4-Trimethylpentene | ||
| Diphenylamines, alkylated | ||
| Diphenyl/Diphenyl ether mixtures | ||
| Diphenyl ether | ||
| Diphenyl ether/Diphenyl phenyl ether mixture | ||
| Diphenylmethane diisocyanate | 2489 | |
| Diphenylol propane-epichlorohydrin resins | ||
| Di-n-propylamine | 2383 | |
| Dodecene (all isomers) | ||
| Dodecyl alcohol | ||
| Dodecylamine/Tetradecylamine mixture | ||
| Dodecyldimethylamine/Tetradecyldimethylamine mixture | ||
| Dodecyl diphenyl ether disulphonate solution | ||
| Dodecylphenol | ||
| Drilling brines, containing zinc salts | ||
| Epichlorohydrin | 2023 | |
| Ethanolamine | 2491 | |
| 2-Ethoxyethyl acetate | 1172 | |
| Ethyl acrylate | 1917 | |
| Ethylamine | 1036 | |
| Ethylamine solutions (72% or less) | 2270 | |
| Ethyl amyl ketone | 2271 | |
| Ethylbenzene | 1175 | |
| N-Ethylbutylamine | ||
| Ethyl butyrate | 1180 | |
| Ethylcyclohexane | ||
| N-Ethylcyclohexylamine | ||
| Ethylene chlorohydrin | 1135 | |
| Ethylene cyanohydrin | ||
| Ethylenediamine | 1604 | |
| Ethylene dibromide | 1605 | |
| Ethylene dichloride | 1184 | |
| Ethylene glycol butyl ether acetate | ||
| Ethylene glycol diacetate | ||
| Ethylene glycol methyl ether acetate | ||
| Ethylene glycol monoalkyl ethers | ||
| Ethylene oxide/Propylene oxide mixtures with an ethylene oxide content of not more than 30% in weight | 2983 | |
| Ethyl 3 - ethoxypropionate | ||
| 2-Ethylexyl acrylate | ||
| 2-Ethylhexylamine | 2276 | |
| Ethylidenenorbornene | ||
| Ethyl methacrylate | 2277 | |
| o-Ethylphenol | ||
| 2-Ethyl-3-propylacrolein | ||
| Ethyltoluene | ||
| Ferric chloride solutions | 2582 | |
| Ferric nitrate/Nitric acid solution | ||
| Fluorosilicic acid (20%–30%) in water solution | 1778 | |
| Formaldehyde solutions (45% or less) | 1198 2209 |
|
| Formic acid | 1779 | |
| Fumaric adduct of rosin, water dispersion | ||
| Furfural | 1199 | |
| Furfuryl alcohol | 2874 | |
| Glutaraldehyde solutions (50% or less) | ||
| Glycidyl ester of C10 trialkylacetic acid | ||
| Heptane (all isomers) | 1206 | |
| Heptanol (all isomers) | ||
| Heptene (all isomers) | ||
| Heptyl acetate | ||
| Hexamethylenediamine solution | 1783 | |
| Hexamethyleneimine | 2493 | |
| Hexane (all isomers) | 1208 | |
| Hexene (all isomers) | ||
| Hexyl acetate | 1233 | |
| Hydrochloric acid | 1789 | |
| Hydrogen peroxide solutions (over 8% but not over 60%) | 2014 2984 |
|
| Hydrogen peroxide solutions (over 60% but not over 70%) | 2015 | |
| 2-Hydroxyethyl acrylate | ||
| 2-Hydroxy-4-(methylthio)-butanoic acid | ||
| Icosa (oxypropane-2,3-diyl)s | ||
| Isophoronediamine | 2289 | |
| Isophorone diisocyanate | 2290 | |
| Isoprene | 1218 | |
| Isopropanolamine | ||
| Isopropylamine | 1221 | |
| Isopropylcyclohexane | ||
| Isopropyl ether | 1159 | |
| Lactonitrile solution (80% or less) | ||
| Lauric acid | ||
| Liquid chemical wastes | ||
| Long-chain alkaryl polyether (C11-C20) | ||
| Long-chain polyetheramine in alkyl (C2-C4) benzenes | ||
| Long-chain polyetheramine in aromatic solvent | ||
| Magnesium long-chain alkyl salicylate (C11)/(C11+) | ||
| Maleic anhydride | 2215 | |
| Mercaptobenzothiazol, sodium salt solution | ||
| Mesityl oxide | 1229 | |
| Metam sodium solution | ||
| Methacrylic acid | 2531 | |
| Methacrylic resin in ethylene dichloride | ||
| Methacrylonitrile | 3079 | |
| N-(2-Methoxy-1-methyl ethyl)-2-ethyl-6-methyl chloroacetanilide | ||
| Methyl acrylate | 1919 | |
| Methylamine solutions (42% or less) | 1235 | |
| Methylamyl acetate | 1233 | |
| Methamyl alcohol | 2053 | |
| Methyl butyrate | 1237 | |
| Methylcyclohexane | 2296 | |
| Methylcyclopentadiene dimer | ||
| Methyldiethanolamine | ||
| 2-Methyl-6-ethylaniline | ||
| 2-Methyl-5-ethylpyridine | 2300 | |
| Methyl formate | 1243 | |
| Methyl heptyl ketone | ||
| Methyl methacrylate | 1247 | |
| Methylnaphthalene (molten) | ||
| 2-Methylpyridine | 2313 | |
| 3-Methylpyridine | 2313 | |
| 4-Methylpyridine | 2313 | |
| Methyl salicylate | ||
| alpha-Methylstyrene | 2303 | |
| Morpholine | 2054 | |
| Motor fuel anti-knock compounds (containing lead alkyls) | 1649 | |
| Naphthalene (molten) | 2304 | |
| Naphthenic acids | ||
| Neodecanoic acid | ||
| Nitrating acid (mixture of sulphuric and nitric acids) | 1796 | |
| Nitric acid (less than 70%) | 2031 | |
| Nitric acid (70% and over) | 2031 2032 |
|
| Nitrobenzene | 1662 | |
| Nitroethane | ||
| Nitroethane (80%)/Nitropropane (20%) | ||
| o-Nitrophenol (molten) | 1663 | |
| 1- or 2-Nitropropane | 2608 | |
| Nitropropane (60%)/Nitroethane (40%) mixture | ||
| o- or p-Nitrotoluenes | 1664 | |
| Nonane (all isomers) | 1920 | |
| Nonene (all isomers) | ||
| Nonyl acetate | ||
| Nonyl alcohol (all isomers) | ||
| Nonylphenol | ||
| Nonyl phenol poly (4+) ethoxylate | ||
| Octane (all isomers) | 1262 | |
| Octanol (all isomers) | ||
| Octene (all isomeers) | ||
| n-Octyl acetate | ||
| Octyl aldehydes | 1191 | |
| Olefin mixtures (C5-C7) | ||
| Olefin mixtures (C5-C15) | ||
| alpha-Olefins (C6-C18) mixtures | ||
| Oleum | 1831 | |
| Oleylamine | ||
| Palm kernel acid oil | ||
| Paraldehyde | 1264 | |
| Pentachloroethane | 1669 | |
| 1,3 - Pentadiene | ||
| Pentane (all isomers) | 1265 | |
| Pentene (all isomers) | ||
| n-Pentyl propionate | ||
| Perchloroethylene | 1897 | |
| Phenol | 2312 | |
| 1-Phenyl-1-xylylethane | ||
| Phosphoric acid | 1805 | |
| Phosphorus, yellow or white | ||
| Phthalic anhydride (molten) | 2214 | |
| alpha-Pinene | 2368 | |
| beta-Pinene | ||
| Pine oil | 1272 | |
| Polyalkyl (Cl8-C22) acrylate in xylene | ||
| Polyalkylene oxide polyol | ||
| Poly (2+) cyclic aromatics | ||
| Polyethylene polyamines | ||
| Polyferric sulphate solution | ||
| Polymethylene polyphenyl isocyanate | ||
| Polyolefinamine in alkyl (C2-C4) benzenes | ||
| Polyolefineamine in aromatic solvent | ||
| Polyolefin phosphorosulphide, barium derivative (C28-C250) | ||
| Potassium chloride solution (10% or more) | ||
| Potassium hydroxide solution | 1814 | |
| Potassium oleate | ||
| n-Propanolamine | ||
| beta-Propiolactone | ||
| Propionaldehyde | 1275 | |
| Propionic acid | 1848 | |
| Propionic anhydride | 2496 | |
| Propionitrile | 2404 | |
| n-Propylamine | 1277 | |
| iso-Propylamine (70% or less) solution | ||
| Propyl benzene (all isomers) | ||
| n-Propyl chloride | 1278 | |
| Propylene dimer | ||
| Propylene oxide | 1280 | |
| Propylene tetramer | 2850 | |
| Propylene trimer | 2057 | |
| Pyridine | 1282 | |
| Rosin | ||
| Rosin soap (disproportionated) solution | ||
| Sodium alkyl (C14-C17) sulphonates (60–65%) solution | ||
| Sodium aluminate solution | 1819 | |
| Sodium borohydride (15% or less)/Sodium hydroxide solution | ||
| Sodium dichromate solution (70% or less) | ||
| Sodium hydrogen sulphide (6% or less)/Sodium carbonate (3% or less) solution | ||
| Sodium hydrogen sulphite solution (45% or less) | 2693 | |
| Sodium hydrosulphide solution (45% or less) | 2949 | |
| Sodium hydrosulphide/Ammonium sulphide solution | ||
| Sodium hydroxide solution | 1824 | |
| Sodium hypochlorite solution (15% or less) | 1791 | |
| Sodium nitrite solution | ||
| Sodium petroleum sulphonate | ||
| Sodium silicate solution | ||
| Sodium sulphide solution (15% or less) | ||
| Sodium sulphite solution (25% or less) | ||
| Sodium tartrates/Sodium succinates solution | ||
| Sodium thiocyanate solution (56% or less) | ||
| Styrene monomer | 2055 | |
| Sulpho hydrocarbon long-chain (C18+) alkylamine mixture | ||
| Sulphuric acid | 1830 | |
| Sulphuric acid, spent | 1832 | |
| Tall oil (crude and distilled) | ||
| Tall oil fatty acid, barium salt | ||
| Tall oil fatty acid (resin acids less than 20%) | ||
| Tall oil soap (disproportionated) solution | ||
| Tetrachloroethane | 1702 | |
| Tetraethylenepentamine | 2320 | |
| Tetrahydrofuran | 2056 | |
| Tetrahydronaphthalene | ||
| Tetramethylbenzene (all isomers) | ||
| Toluene | 1294 | |
| Toluenediamine | 1709 | |
| Toluene diisocyanate | 2078 | |
| o-Toluidine | 1708 | |
| Tributyl phosphate | ||
| 1,2,4-Trichlorobenzene | 2321 | |
| 1,1,1-Trichloroethane | 2831 | |
| 1,1,2-Trichloroethane | ||
| Trichloroethylene | 1710 | |
| 1,2,3-Trichloropropane | ||
| 1,1,2-Trichloro - 1,2,2-trifluoroethane | ||
| Tricresyl phosphate (containing less than 1% ortho-isomer) | ||
| Tricresyl phosphate (containing 1% or more ortho-isomer) | 2574 | |
| Tridecanoic acid | ||
| Triethanolamine | ||
| Triethylamine | 1296 | |
| Triethylbenzene | ||
| Triethylenetetramine | 2259 | |
| Triethyl phosphite | 2323 | |
| Triisopropylated phenyl phosphates | ||
| Trimethylacetic acid | ||
| Trimethylamine solution (30% or less) | 1297 | |
| Trimethylbenzene (all isomers) | ||
| Trimethylhexamethylene diamine (2,2,4- and 2,4,4-isomers) | 2327 | |
| Trimethylhexamethylene diisocyanate (2,2,4- and 2,4,4-isomers) | 2328 | |
| 2,2,4- Trimethyl-1,3-pentane-diol-1-isobutyrate | ||
| Trimethyl phosphite | 2329 | |
| 1,3,5-Trioxane | ||
| Trixylyl phosphate | ||
| Turpentine | 1299 | |
| Undecanoic acid | ||
| 1-Undecene | ||
| Undecyl alcohol | ||
| Urea/Ammonium nitrate solution (containing aqua ammonia) | ||
| Valeraldehyde (all isomers) | 2058 | |
| Vinyl acetate | 1301 | |
| Vinyl ethyl ether | 1302 | |
| Vinylidene chloride | 1303 | |
| Vinyl neodecanoate | ||
| Vinyltoluene | 2618 | |
| White spirit, low (15–20%) aromatic | 1300 | |
| Xylenes | 1307 | |
| Xylenol | 2261 | |
| Zinc alkaryl dithiophosphate (C7-C16) | ||
| Zinc alkyl dithiophosphate (C3-C14) |
Part 2
| Substances | UN No | |
|---|---|---|
| Acrylonitrile-Styrene copolymer dispersion in polyether polyol | ||
| Alkenyl (C11+) amide | ||
| Alkyl (C8+) amine, Alkenyl (Cl2+) acid ester mixture | ||
| Alkyldithiothiadiazole (C6-C24) | ||
| Aluminium sulphate solution | ||
| Ammonium hydrogen phosphate solution | ||
| Ammonium polyphosphate solution | ||
| Ammonium sulphate solution | ||
| n-Amyl alcohol | 1105 | |
| sec-Amyl alcohol | 1105 | |
| Amyl alcohol, primary | 1105 | |
| Animal and fish acid oils and distillates, not otherwise specified, including: animal acid oil, fish acid oil, lard acid oil, mixed acid oil, mixed general acid oil, mixed hard acid oil, mixed soft acid oil |
||
| Animal and fish oils, not otherwise specified, including: cod liver oil, lanolin, neatsfoot oil, pilchard oil, sperm oil |
||
| Aryl polyolefins (C11-C50) | ||
| Brake fluid base mix: (Poly(2-8) alkylene (C2-C3) glycols/Polyalkylene (C2-C10) glycols/monoalkyl (C1-C4) ethers and their borate esters) |
||
| Butylene glycol | ||
| gamma-Butyrolactone | ||
| Calcium hydroxide slurry | ||
| Calcium long-chain alkaryl sulphonate (C11-C50) | ||
| Calcium long-chain alkyl phenate sulphide (C8-C40) | ||
| epsilon-Caprolactam (molten or aqueous solutions) | ||
| Choline chloride solutions | ||
| Citric acid (70% or less) | ||
| Coconut oil fatty acid methyl ester | ||
| Cyclohexanol | ||
| Decahydronaphthalene | 1147 | |
| Diacetone alcohol | 1148 | |
| Dialkyl (C7-C13) phthalates | ||
| Diethylene glycol | ||
| Diethylene glycol dibutyl ether | ||
| Diethylene glycol phthalate | ||
| Di-(2-ethylhexyl) adipate | ||
| Diisobutyl ketone | 1157 | |
| Diisononyl adipate | ||
| Diisopropylnaphthalene | ||
| 2,2-Dimethylpropane-1,3-diol | ||
| Dinonyl phthalate | ||
| Ditridecyl phthalate | ||
| Diundecyl phthalate | ||
| Dodecenylsuccinic acid, dipotassium salt solution | ||
| 2-Ethoxyethanol | 1171 | |
| Ethyl acetate | 1173 | |
| Ethyl acetoacetate | ||
| 2-Ethyl-2-(hydroxymethyl) propane-1,3,-diol, (C8-C10) ester | ||
| Ethylenediaminetetraacetic acid, tetrasodium salt solution | ||
| Ethylene glycol | ||
| Ethylene glycol acetate | ||
| Ethylene glycol methyl butyl ether | ||
| Ethylene glycol phenyl ether | ||
| Ethylene glycol phenyl ether/Diethylene glycol phenyl ether mixture | ||
| 2-Ethylhexanoic acid | ||
| Ethyl propionate | 1195 | |
| Ferric hydroxyethylethylenediaminetriacetic acid, trisodium salt solution | ||
| Formamide | ||
| Glycerine (83%), Dioxanedimethanol (17%) mixture | ||
| Glycerol monooleate | ||
| Glyoxal solution (40% or less) | ||
| n-Heptanoic acid | ||
| Hexamethylenediamine adipate (50% in water) | ||
| Hexamethylenetetramine solutions | ||
| Hexanoic acid | ||
| Hexanol | 2282 | |
| N-(Hydroxyethyl) ethylenediaminetriacetic acid, trisodium salt solution | ||
| Isoamyl alcohol | 1105 | |
| Isobutyl formate | 2393 | |
| Iso- and cyclo-alkanes (C10-C11) | ||
| Isophorone | ||
| Lactic acid | ||
| Latex, ammonia (1% or less)-inhibited | ||
| Long-chain alkaryl sulphonic acid (C16-C60) | ||
| Magnesium long-chain alkaryl sulphonate (C11-C50) | ||
| 3-Methoxybutyl acetate | ||
| Methyl acetoacetate | ||
| Methyl alcohol | 1230 | |
| Methyl amyl ketone | 1110 | |
| Methylbutenol | ||
| Methyl tert-butyl ether | 2398 | |
| Methyl butyl ketone | ||
| Methylbutynol | ||
| Methyl isobutyl ketone | 1245 | |
| Methyl propyl ketone | 1249 | |
| N-Methyl-2 pyrrolidone | ||
| Myrcene | ||
| Naphthalenesulphonic acid-Formaldehyde copolymer, sodium salt solution | ||
| Nitrilotriacetic acid, trisodium salt solution | ||
| Nonanoic acid (all isomers) | ||
| Nonyl methacrylate monomer | ||
| Octanoic acid (all isomers) | ||
| Olefin-Alkyl ester coplymer (molecular weight 2000+) | ||
| Oleic acid | ||
| Palm oil fatty acid methyl ester | ||
| Palm stearin | ||
| Pentaethylenehexamine | ||
| Pantanoic acid | ||
| Poly(2-8)alkylene glycol monoalkyl (C1-C6) ether | ||
| Poly(2-8)alkylene glycol monoalkyl (C1-C6) ether acetate | ||
| Polybutenyl succinimide | ||
| Polyether (molecular weight 2000+) | ||
| Polyolefin amide alkeneamine (C28+) | ||
| Polyolefin amide alkeneamine borate (C28-C250) | ||
| Polyolefin amide alkeneamine polyol | ||
| Polyolefin anhydride | ||
| Polyolefin ester (C28-C250) | ||
| Polyolefin phenolic amine (C28-C250) | ||
| Polypropylene glycol | ||
| n-Propyl acetate | 1276 | |
| Propylene glycol methyl ether acetate | ||
| Propylene glycol monoalkyl ether | ||
| Sodium acetate solutions | ||
| Sodium benzoate | ||
| Sodium carbonate solution | ||
| Sulphohydrocarbon (C3-C88) | ||
| Sulpholane | ||
| Tallow | ||
| Tallow fatty acid | ||
| Triethyl phosphate | ||
| Trimethylolpropane polyethoxylate | ||
| Urea/Ammonium mono- and di-hydrogen phosphate/Potassium chloride solution | ||
| Urea/Ammonium nitrate solution | ||
| Urea/Ammonium phosphate solution | ||
| Vegetable acids and oils and distillates, not otherwise specified, including: corn acid oil, cotton seed oil, dark mixed acid oil, groundnut acid oil, mixed acid oil, mixed general acid oil, mixed hard acid oil, mixed soft acid oil, rapeseed acid oil, safflower acid oil, soya acid oil, sunflower seed acid oil |
||
| Vegetable oils, not otherwise specified, including: babbasu oil, beech nut oil, castor oil, cocoa butter, coconut oil, corn oil, cotton seed oil, groundnut oil, hazelnut oil, linseed oil, nutmeg butter, oiticica oil, olive oil, palm nut oil, palm oil, peel oil (oranges and lemons), perilla oil, poppy oil, raisin seed oil, rape seed oil, rice bran oil, safflower oil, salad oil, sesame oil, soya bean oil, sunflower oil, tucum oil, tung oil, walnut oil |
||
| Waxes | ||
| Zinc alkenyl carboxamide |
Schedule 2 |
Ashphalt solutions
Blending Stocks
Roofers Flux
Straight run residue
Gasoline blending stocks
Alkylates - fuel
Reformates
Polymer - fuel
Gasoline
Casinghead (natural)
Automotive
Aviation
Straight Run
Fuel oil no. 1 (kerosene)
Fuel oil no. 1 - D
Fuel oil no. 2
Fuel oil no. 2 - D
Jet fuels
JP - 1 (kerosene)
JP - 3
JP - 4
JP - 5 (kerosene, heavy)
Turbo fuel
Kerosene
Mineral spirit
Oils
Clarified
Crude oil
Mixtures containing crude oil
Diesel oil
Fuel oil no. 4
Fuel oil no. 5
Fuel oil no. 6
Residual fuel oil
Road oil
Transformer oil
Aromatic oil (excluding vegetable oil)
Lubricating oil and blending stocks
Mineral oil
Motor oil
Penetrating oil
Spindle oil
Turbine oil
Distillates
Straight run
Flashed feed stocks
Gas oil
Cracked
Naptha
Solvent
Petroleum
Heartcut distillate oil
Schedule 3 |
Part 1
Additional matters to be included in application under section 88
1 The application must include a detailed description and characterisation of the waste to enable a proper assessment to be made of its potential impacts on human health and the environment. The description must include any material capable of creating floating debris or otherwise contributing to an adverse effect on the environment.
-
2 The characterisation of the wastes and their constituents must include—
(a) the origin, total amount, form, and average composition:
(b) the properties: physical, chemical, biochemical, and biological:
(c) the toxicity:
(d) the persistence: physical, chemical, and biological:
(e) the accumulation and biotransformation in biological materials or sediments.
-
3 The application must include information about—
(a) the types, amounts, and relative hazard of wastes generated; and
(b) the details of the production process and the sources of wastes within that process; and
-
(c) the feasibility of the following waste reduction or prevention techniques:
(i) product reformulation:
(ii) clean production technologies:
(iii) process modification:
(iv) input substitution:
(v) on-site, closed-loop recycling.
4 For dredged material and sewage sludge, the application must identify the sources of contamination and waste prevention strategies that may be used to control that contamination.
-
5 Applications to dump waste or other matter must include information about the consideration that has been given to the following hierarchy of waste management options:
(a) re-use:
(b) off-site recycling:
(c) destruction of hazardous constituents:
(d) treatment to reduce or remove the hazardous constituents:
(e) disposal on land, into air, and in water.
-
6 The application must include the following information about the proposed dump site:
(a) the physical, chemical, and biological characteristics of the water column and the seabed:
(b) identification of values and other uses of the sea in the area under consideration:
(c) an assessment of the constituent fluxes associated with dumping in relation to existing fluxes of substances in the marine environment:
(d) the economic and operational feasibility.
7 The application must include an assessment of the potential effects of sea or land disposal options.
8 The application for dumping must integrate information on waste characteristics, conditions at the proposed dump site(s), fluxes, and proposed disposal techniques. The application must specify the potential effects on the environment and define the nature, temporal, and spatial scales and duration of expected effects and state any assumptions.
Part 2
Additional matters to be considered by the consent authority
-
9 Consideration of an application must have regard to the avoidance, remedying, or mitigation of environmental disturbance and detriment. Consideration of an application must also have regard to the imposing of conditions specifying—
(a) the types and sources of materials to be dumped:
(b) the location of the dump site(s):
(c) the method of dumping:
(d) monitoring and reporting requirements.
10 Consideration of an application must have regard to the imposition of monitoring programmes as a condition of a resource consent.
Schedule 4 |
1 Ship propulsion.
2 Heat exchange systems, including engine cooling systems, air conditioning, refrigeration, and condensers.
3 Stormwater drainage from systems and scuppers, except from those areas used for the storage of any harmful substance.
4 The use of washing facilities in the accommodation areas producing greywater from showers, handbasins, baths, galleys, dishwashers, and laundries but does not include use of any dispensary, sick bay, or other medical premises.
5 The cleaning of the ship or offshore installation, except for the exterior of the hull below the load line or parts of the ship used for carrying cargo.
6 The incineration of waste or other matter generated from a ship or offshore installation.
7 Firefighting.
8 The operation of a weapon system on any ship of the New Zealand Defence Force.
Schedule 5 |
Schedule 5: added, on 1 July 2002, by regulation 7(a) of the Resource Management (Marine Pollution) Amendment Regulations 2002 (SR 2002/99).
(Approved in accordance with International Maritime Organisation resolution MEPC.2(VI))
| Manufacturing countries | Manufactured by | Type and model | Designed hydraulic loading (m3/day) | Designed organic loading (kg/day) | |||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | Brazil | 1 | Tridente Ind. E. Commercio de Equipamentos Navais Ltda. 20090 Rio de Janeiro |
“Super Trident” |
|||||
| ST25X | 17.5 | 15.0 | |||||||
| ST 2 | 1.6 | 1.2 | |||||||
| ST 4 | 3.01 | 2.4 | |||||||
| ST 6 | 4.55 | 3.6 | |||||||
| ST 8 | 6.0 | 4.8 | |||||||
| ST10 | 7.4 | 6.0 | |||||||
| ST13 | 9.6 | 7.8 | |||||||
| ST15 | 11.0 | 9.0 | |||||||
| ST20 | 14.5 | 12.0 | |||||||
| ST25 | 17.5 | 15.0 | |||||||
| ST30 | 23.1 | 18.0 | |||||||
“Retrofit Trident” |
|||||||||
| RT20 | 1.6 | 1.2 | |||||||
| RT40 | 3.01 | 2.4 | |||||||
| RT60 | 4.55 | 3.6 | |||||||
| RT80 | 6.0 | 4.8 | |||||||
| 2 | SEMCO SA Sao Paulo |
“Super Trident” |
|||||||
| ST 2 | 1.6 | 1.2 | |||||||
| ST 4 | 3.01 | 2.4 | |||||||
| ST 6 | 4.55 | 3.6 | |||||||
| ST 8 | 6.0 | 4.8 | |||||||
| ST10 | 7.4 | 6.0 | |||||||
| ST13 | 9.6 | 7.8 | |||||||
| ST15 | 11.0 | 9.0 | |||||||
| ST20 | 14.5 | 12.0 | |||||||
| ST25 | 17.5 | 15.0 | |||||||
| ST30 | 23.1 | 18.0 | |||||||
“Retrofit Trident” |
|||||||||
| RT20 | 1.6 | 1.2 | |||||||
| RT40 | 3.01 | 2.4 | |||||||
| RT60 | 4.55 | 3.6 | |||||||
| RT80 | 6.0 | 4.8 | |||||||
| 2 | Bulgaria | 1 | MICHAILOV MV CO. Bourgas |
TYPE 434 | 1.5 | 1.8 | |||
| 3 | China | 1 | Shanghai Marine Instrument and Equipment Works, 200 Minseng Rd, Shanghai |
CSWA-3 | 2.4 | 0.72 | |||
| 2 | Taixing Ship’s Machinery Works Taixing, Jiangsu |
WCX-36 | 39.6 | 1.26 | |||||
| WCX-24 | 26.4 | 0.84 | |||||||
| WCB-300(s) | 22.32 | 15.50 | |||||||
| WCB-250(S) | 18.24 | 13.00 | |||||||
| WCB-200(S) | 14.40 | 10.50 | |||||||
| WCB-150(S) | 10.32 | 8.00 | |||||||
| WCB-100(S) | 7.44 | 5.50 | |||||||
| WCB-80 | 6.00 | 4.30 | |||||||
| WCB-60 | 4.56 | 3.30 | |||||||
| WCB-50 | 3.60 | 2.70 | |||||||
| WCB-40 | 2.88 | 2.20 | |||||||
| WCB-30 | 2.16 | 1.60 | |||||||
| WCB-25 | 1.75 | 1.25 | |||||||
| WCB-20 | 1.44 | 1.10 | |||||||
| WCB-15 | 1.19 | 0.85 | |||||||
| WCB-10 | 0.72 | 0.60 | |||||||
| WCB-6 | 0.42 | 0.21 | |||||||
| 3 | Zhangjiang Marine Auxiliary Machinery Factory Zhangjiang, Jiangsu |
WCB-40Z | 3.08 | 1.54 | |||||
| 4 | Luzhou Machinery Works Nanjing, Jiangsu |
ST1 | 0.85 | 0.6 | |||||
| ST2 | 1.6 | 1.2 | |||||||
| ST3 | 2.31 | 1.8 | |||||||
| ST4 | 3.01 | 2.4 | |||||||
| ST6 | 4.55 | 3.6 | |||||||
| ST8 | 6.0 | 4.8 | |||||||
| ST10 | 7.4 | 6.0 | |||||||
| ST15 | 11.0 | 9.0 | |||||||
| RT40 | 3.01 | 2.4 | |||||||
| 4 | Croatia | 1 | Ekolo§ki sistemi d.o.o., 47000 Karlovac, Mala §var a, 155 |
BRODOPUR45 | 3.15 | 2.70 | |||
| BRODOPUR BP-25 | 1.6 | 1.38 | |||||||
| BRODOPUR BP-45 | 3.15 | 2.70 | |||||||
| 2 | Tvornica Turbina d.o.o., Kneza Branimira 8 4700 Karlovac |
BRODOPUR BP-25 | 1.6 | 1.38 | |||||
| 5 | Denmark | 1 | Atlas A/S Baltorpvej 154 DK 2750 Ballerup Copenhagen |
AWWU | 36.0 | — | |||
| 6 | Germany | 1 | VEB Abwasserbehandlungsanlagen Merseburg |
KA-MR 1.5 S 50C | 1.75:5.0 | 1.14:3.25 | |||
| KA-MR 1.5 S 50B | 1.5:4.25 | 0.98:2.76 | |||||||
| 2 | Wasserbehandlung Merseburg GmbH Amtshluser 23-29 4200 Merseburg |
KA-MR 1.5 S 50-1/E | 2.0 | 1.3 | |||||
| 3 | KG Hamman Wassertechnik GmbH P.O. Box 21 31 2105 Hamburg Seevetal 2 |
HL-Cont | 108.0 | 816.0 | |||||
| H1rCont | 720.0 | 540.0 | |||||||
| HL-Cont | 360.0 | 270.0 | |||||||
| HIrCont | 168.0 | 126.0 | |||||||
| HLrCont | 96.0 | 72.0 | |||||||
| HLrCont 1 m’h | 24.0 | 18.0 | |||||||
| HL-Cont 7 | 168.0 | 126.0 | |||||||
| HL-Compact-Mini | 24.0 | 18.0 | |||||||
| HL-Cont C-45 | 96.0 | 72.0 | |||||||
| 4 | Format-Chemie und Apparate GmbH 2086 Ellerau |
MSTP 1 | 6.0 | 3.0 | |||||
| MSTP 1 | 6.6 | 3.3 | |||||||
| MSTP 1A | 3.3 | 1.65 | |||||||
| MSTP 1B | 4.5 | 2.25 | |||||||
| MSTP 2 | 12.0 | 6.0 | |||||||
| MSTP 3 | 18.0 | 9.0 | |||||||
| MSTP 4 | 22.5 | 11.25 | |||||||
| MSTP 5 | 33.0 | 16.5 | |||||||
| MSTP 6 | 48.0 | 24.0 | |||||||
| MSTP 7 | 69.0 | 34.5 | |||||||
| MSTP 8 | 150.0 | 75.0 | |||||||
| MSTP 9 | 300.0 | 150.0 | |||||||
| 5 | Format-Chemie GmbH P.O. Box 1263 25476 Ellerau |
MSTP 1A | 1.26 | 0.48 | |||||
| MSTP 1B | 2.10 | 0.81 | |||||||
| MSTP 1 | 2.50 | 0.95 | |||||||
| MSTP 2 | 3.85 | 1.49 | |||||||
| MSTP 3 | 5.25 | 2.03 | |||||||
| MSTP 4 | 6.65 | 2.57 | |||||||
| MSTP 5 | 9.80 | 3.80 | |||||||
| MSTP 6 | 14.00 | 5.40 | |||||||
| MSTP 7 | 21.00 | 8.10 | |||||||
| MSTP 8 | 45.50 | 17.60 | |||||||
| MSTP 9 | 91.00 | 35.10 | |||||||
| 6 | Apparatebau Salzkotten GmbH Ferdinand-Henze-Strasse 9 33154 Salzkotten |
Bio-Compact KSA-S-10 | 1.75 | 0.8 | |||||
| Bio-Compact KSA-S-15 | 2.625 | 1.2 | |||||||
| Bio-Compact KSA-S-20 | 3.5 | 1.6 | |||||||
| Bio-Compact KSA-S 25 | 4.375 | 2.0 | |||||||
| Bio-Compact KSA-S-35 | 6.125 | 3.060 | |||||||
| Bio-Compact KSA-S-50 | 8.750 | 4.375 | |||||||
| Bio-Compact KSA-S-100 | 17.5 | 8.0 | |||||||
| Bio-Compact KSA-S 200 | 35.0 | 15.0 | |||||||
| Bio-Compact KSA-S-300 | 52.5 | 21.45 | |||||||
| Bio-Compact KSA-S-600 | 105.0 | 36.0 | |||||||
| Bio-Compact KSA-S-800 | 140.0 | 48.0 | |||||||
| 7 | Aquachemindustrielle Wasserbehandlungs-GmbH, 14-16 5000 Köln |
BIO AQUA Aerob 35 | 6.125 | 2.6 | |||||
| BIO AQUA Aerob 45 | 9.625 | 6.875 | |||||||
| BIO AQUA Aerob 55 | 7.875 | 3.4 | |||||||
| BIO AQUA Aerob | 3.15 | 2.7 | |||||||
| 18/36 | 4.375 | 3.72 | |||||||
| BIO AQUA Aerob 25/50 | 6.125 | 5.25 | |||||||
| BIO AQUA Aerob 35/70 | 9.625 | 8.25 | |||||||
| BIO AQUA Aerob 55/110 | 12.6 | 23.6 | |||||||
| Bio AQUA Aerob 150/300 | 13.125 | 39.375 | |||||||
| Bio AQUA Aerob 75/150 | 13.125 | 39.375 | |||||||
| Bio AQUA Aerob 100/200 | 17.5 | 52.5 | |||||||
| Bio AQUA Aerob 140/280 | 24.5 | 73.5 | |||||||
| Bio AQUA Aerob 240/480 | 45.0 | 135.0 | |||||||
| 8 | Paul Pleiger Maschinenfabrik GmbH & Co. KG, D-5810 Witten 3 |
BIOMAT | |||||||
| BS 10 | 2.2 | 0.8 | |||||||
| BS 15 | 3.3 | 1.17 | |||||||
| BS 20 | 4.4 | 1.5 | |||||||
| BS 25 | 5.5 | 1.75 | |||||||
| 9 | Willi Becker Ingenieurburo GmbH Hamburg |
“HELI-FLOW”BF 5M |
0.38 | 0.3 | |||||
“HELI-FLOW”HF 1OM |
0.76 | 0.6 | |||||||
“HELI-FLOW”BF 13M |
0.98 | 0.78 | |||||||
“HELI-FLOW”MY 19M |
1.42 | 1.14 | |||||||
“HELI-FLOW”BF 26M |
1.97 | 1.56 | |||||||
“HELI-FLOW”BF 32M |
2.42 | 1.92 | |||||||
“HELI-FLOW”BF 41 M |
3.10 | 2.46 | |||||||
“HELI-FLOW”HF 58M |
4.39 | 3.48 | |||||||
“HELI-FLOW”BF 71 M |
5.38 | 4.26 | |||||||
“HELI-FLOW”HF 84M |
6.36 | 5.04 | |||||||
| 10 | Aqua Mar GmbH Rothenbacher Weg 4a 5064 Rosrath 1 |
Aqua Mar Bio Unit MSP I | 2.62 | 1.25 | |||||
| Aqua Mar Bio Unit MSP II | 5.75 | 2.47 | |||||||
| Aqua Mar Bio Unit MSP III | 7.875 | 3.38 | |||||||
| Aqua Mar Bio Unit MSP IV | 12.25 | 5.25 | |||||||
| Aqua Mar Bio Unit MSP V | 26.5 | 11.25 | |||||||
| Aqua Mar Bio Unit MSP VI | 44.0 | 19.5 | |||||||
| Aqua Mar Bio Unit MSP VII | 70.0 | 21.0 | |||||||
| Aqua Mar Bio, Unit MSP VIII | 105.0 | 32.0 | |||||||
| Aqua Mar Bio Unit MSP IX | 142.0 | 47.6 | |||||||
| Aqua Mar Bio Unit MSP X | 172.0 | 75.0 | |||||||
| Aqua Mar Bio Unit MSP 25 | 4.38 | 1.875 | |||||||
| Aqua Mar Bio Unit MSP 60 | 10.5 | 4.5 | |||||||
| Aqua Mar Bio Unit MSP 80 | 13.12 | 5.63 | |||||||
| 11 | Aqua chemindustrielle Abwasserbehandlung-GmbH Quellenweg 13 5060 Bergisch-Gladbach 1 |
Bio Aqua Aerob 45/90 | 7.815 | 23.625 | |||||
| Bio Aqua Aerob 12 | 2.1 | 0.89 | |||||||
| Bio Aqua Aerob 12/24 | 2.1 | 1.80 | |||||||
| Bio Aqua Aerob 25/50 | 4.375 | 13.125 | |||||||
| Bio Aqua Aerob 35/70 | 6.125 | 18.375 | |||||||
| Bio Aqua Aerob 45/90 | 7.875 | 23.625 | |||||||
| Bio Aqua Aerob 55/110 | 9.625 | 28.875 | |||||||
| 12 | Citex Maschinen-Apparatebau Gastechnik GmbH 2000 Hamburg 71 |
CEAK 35/50 | 12.0 | 600.0 | |||||
| 13 | Schiffsanlagenbau Barth GmbH, Chausseestr, 5B 0-2380 Barth |
MSA 2.5 | 1.75-3.5 | 1.1-2.3 | |||||
| MSA 5 | 3.5-6.75 | 2.3-4.4 | |||||||
| MSA 10 | 6.75-13.5 | 4.4-8.8 | |||||||
| MSA 15 | 13.5-20.25 | 8.8-13.2 | |||||||
| MSA 2.5 CL | 1.75-3.5 | 1.1-2.3 | |||||||
| MSA 5CL | 3.5-6.75 | 2.3-4.4 | |||||||
| 14 | VEB Kombinat Schiflibau Rostock |
KAREA25 | 25.0 | 12.5 | |||||
| 15 | Aquamar GmbH Zum Alten Wasserwerk 6 D-51491 Overath |
Bio unit MSP III | 7.875 | 3.38 | |||||
| Bio unit MSP 1 | 2.62 | 1.125 | |||||||
| Bio unit MSP 25 | 4.38 | 1.875 | |||||||
| Bio unit MSP II | 5.75 | 2.47 | |||||||
| Bio unit MSP 60 | 10.5 | 4.5 | |||||||
| Bio unit MSP IV | 12.25 | 5.15 | |||||||
| Bio unit MSP 80 | 13.12 | 5.63 | |||||||
| 16 | Hamann Wassertechnik GmbH P.O.B2201 D-21202 Seevetal |
Basis-Frame | 24.0 | 18.0 | |||||
| Norway-Frame | 24.0 | 18.0 | |||||||
| L-Frame | 96.0 | 72.0 | |||||||
| Norway-Frame | 96.0 | 72.0 | |||||||
| Double-Frame | 96.0 | 72.0 | |||||||
| L-Frame | 168.0 | 126.0 | |||||||
| Norway-Frame | 168.0 | 126.0 | |||||||
| Double-Frame | 168.0 | 126.0 | |||||||
| L-Frame | 360.0 | 270.0 | |||||||
| Norway-Frame | 360.0 | 270.0 | |||||||
| Double-Frame | 360.0 | 270.0 | |||||||
| Compact-Mini -Big-Tank | 36.0 | 27.0 | |||||||
| Mini-Frame-Big | 36.0 | 27.0 | |||||||
| Norway-Frame-Big | 36.0 | 27.0 | |||||||
| HL-Cont Super Mini | 2.52 | 1.89 | |||||||
| HL-Cont (1 m3/h) Compact-Mini | 24.0 | 18.0 | |||||||
| HL-Cont. (96 m3/d) | 96.0 | 72.0 | |||||||
| HL-Cont. (168 m3/d) | 168.0 | 126.0 | |||||||
| HL-Cont. (360 m3/d) | 360.0 | 270.0 | |||||||
| HL-Cont. (720 m3/d) | 720.0 | 540.0 | |||||||
| HL-Cont. (1080 m3/d) | 1080.0 | 810.0 | |||||||
| 17 | Triton-Format GmbH Wemer-von-Siemen-Str. 2 25479 Ellerau |
MSTP IA | 1.26 | 0.48 | |||||
| MSTP 1B | 2.1 | 0.81 | |||||||
| MSTP 1 | 2.5 | 0.95 | |||||||
| MSTP 2 | 3.85 | 1.49 | |||||||
| MSTP 3 | 5.25 | 2.03 | |||||||
| MSTP 4 | 6.65 | 2.57 | |||||||
| MSTP 5 | 9.8 | 3.8 | |||||||
| MSTP 6 | 14.0 | 5.4 | |||||||
| MSTP 7 | 21.0 | 8.1 | |||||||
| MSTP 8 | 45.5 | 17.6 | |||||||
| MSTP 9 | 91.0 | 35.1 | |||||||
| MSTP 10-1500V | 37.5 | 40.5 | |||||||
| MSTP 11-1800V | 45.0 | 48.6 | |||||||
| 18 | MARTIN SYSTEMS AG Bettelhecker Str. 25 96515 Sonneberg |
STKS 65 | 16.25 | 5.85 | |||||
| STKS 25 | 5.50 | 2.30 | |||||||
| STKS 110 | 16.80 | 9.92 | |||||||
| STKS 250 | 35.00 | 22.50 | |||||||
| STKS 300 | 42.50 | 25.50 | |||||||
| BMA 15 | 2.40 | 1.35 | |||||||
| 19 | UTS Maschinen- und Ausrilstungsbau GmbH Friedrich-Engels-Str. 23-25 96515 Sonneberg |
STKS 25 | 5.50 | 2.30 | |||||
| STKS 65 | 16.25 | 5.85 | |||||||
| 20 | DVZ-Services GmbH Waldstrasse 23 D-28844 Weyhe |
DVZ-MSD II/10 | 0.85 | 0.95 | |||||
| DVZ-MSD II/20 | 1.73 | 1.90 | |||||||
| DVZ-MSD II/30 | 2.59 | 2.85 | |||||||
| DVZ-MSD II/40 | 3.46 | 3.80 | |||||||
| DVZ-MSD II/50 | 4.32 | 4.75 | |||||||
| DVZ-MSD II/60 | 5.18 | 5.70 | |||||||
| DVZ-MSD II/70 | 6.04 | 6.65 | |||||||
| DVZ-MSD II/80 | 6.91 | 7.60 | |||||||
| DVZ-MSD II/100 | 8.64 | 9.50 | |||||||
| DVZ-MSD II/120 | 10.36 | 11.40 | |||||||
| DVZ-MSD II/140 | 12.08 | 13.30 | |||||||
| DVZ-MSD II/160 | 13.82 | 15.20 | |||||||
| DVZ-MSD II/180 | 15.54 | 17.10 | |||||||
| DVZ-MSD II/200 | 17.28 | 19.00 | |||||||
| DVZ-MSD II/240 | 20.72 | 22.80 | |||||||
| DVZ-MSD II/300 | 22.464 | 24.71 | |||||||
DVZ-SKA 10 “Biomaster” |
1.85 | 1.29 | |||||||
DVZ-SKA 20 “Biomaster” |
3.70 | 2.58 | |||||||
DVZ-SKA 30 “Biomaster” |
5.50 | 3.86 | |||||||
DVZ-SKA 40 “Biomaster” |
7.40 | 5.15 | |||||||
DVZ-SKA 50 “Biomaster” |
9.20 | 6.40 | |||||||
DVZ-SKA 70 “Biomaster” |
12.95 | 6.48 | |||||||
| 21 | VA TECH WABAG ESMIL GmbH Lise-Meitner-Str. 4a 40878 Ratingen |
MEMROD LT 10 | 1.8 | 0.9 | |||||
| MEMROD LT 25 | 3.75 | 2.25 | |||||||
| MEMROD LT 230 | 34.5 | 20.7 | |||||||
| 22 | Rochem UF-Systeme GmbH Stadtshausbrücke 1-3 Fleethof 20355 Hamburg |
Bio-Filt ® 03/06 | 24.0 | 10.0 | |||||
| Bio-Filt ® 16/18 TWIN | 150.0 | 230.0 | |||||||
| 23 | MARTIN SYSTEMS AG Ackerstrasse 40 D-96515 Sonneberg |
BMA 25 | 5.0 | 2.25 | |||||
| BMA 15 | 2.4 | 1.35 | |||||||
| 24 | RWO Abwassertechnik GmbH Leerkämpe 3 D-28259 Bremen |
WWT3 BIOPUR | 4.63 | 2.174 | |||||
| WWT4 BIOPUR | 6.48 | 3.04 | |||||||
| WWT1 BIOPUR | 1.76 | 0.83 | |||||||
| WWT2 BIOPUR | 2.59 | 1.22 | |||||||
| WWT5 BIOPUR | 9.81 | 4.61 | |||||||
| 7 | Finland | 1 | Aquamaster-Rauma Oy P Box 220 SF-26101 Rauma |
UNEX BIO-20 | 1.4 | 0.7 | |||
| UNEX BIO-40 | 2.8 | 1.4 | |||||||
| UNEX BIO-60 | 4.2 | 2.1 | |||||||
| UNEX BIO-80 | 5.6 | 2.8 | |||||||
| UNEX BIO-100 | 7.0 | 3.5 | |||||||
| UNEX BIO-200 | 14.0 | 7.0 | |||||||
| UNEX BIO-600 | 42.0 | 21.0 | |||||||
| UNEX BIO-800 | 56.0 | 28.0 | |||||||
| UNEX BIO SECTIONAL | |||||||||
| 20 | 1.4 | 0.7 | |||||||
| 40 | 2.8 | 1.4 | |||||||
| 60 | 4.2 | 2.1 | |||||||
| 80 | 5.6 | 2.8 | |||||||
| UNEX Cem | |||||||||
| –3 | 72.0 | 28.8 | |||||||
| –7.5 | 180.0 | 72.0 | |||||||
| –15 | 360.0 | 144.0 | |||||||
| UNEX SIMULTAN | |||||||||
| –10 | 3.0 | 1.5 | |||||||
| –15 | 4.0 | 2.0 | |||||||
| –40 | 12.0 | 6.0 | |||||||
| –60 | 18.0 | 9.0 | |||||||
| –80 | 24.0 | 12.0 | |||||||
| –100 | 30.0 | 15.0 | |||||||
| 8 | Greece | 1 | Environmental Protection Engineering Ltd 88 Iroon Polytechniou Str. 18536 Piraeus |
TRITON 196 | 1.96 | 0.85 | |||
| TRITON 1900 | 19.00 | 8.34 | |||||||
| TRITON 408 | 4.08 | 1.77 | |||||||
| TRITON 1000 | 10.0 | 4.34 | |||||||
| TRITON 4000 | 40.0 | 17.35 | |||||||
| 9 | Italy | 1 | Pollution Control Engineering Sr. l, Trattacnento Acque Via Dei Mille 99, La Spezia |
BIODISK FVN 25 | 2.5 | (less than the standards) | |||
| BIODISK FVN 30 | 4.0 | ||||||||
| BIODISK FVN 50 | 6.0 | ||||||||
| BIODISK FVN 60 | 8.0 | ||||||||
| BIODISK FVN 100 | 15.0 | ||||||||
| BIODISK FVN 200 | 30.0 | ||||||||
| BIODISK FVN 300 | 45.0 | ||||||||
| 2 | I.S.L.R. Sas di Antonelli & C 16165 Genova Struppa |
BIOEPURO-B/50 | 5.0 | ||||||
| 75 | 15.0 | ||||||||
| 25 | 2.5 | ||||||||
| 20 | 2.0 | ||||||||
| 75-2 | 7.5 | ||||||||
| 100 | 10.0 | ||||||||
| 125 | 12.5 | ||||||||
| 150 | 15.0 | ||||||||
| 200 | 20.0 | ||||||||
| 10 | Japan | 1 | Sasakura Engineering Co. Ltd Osaka 500 |
Super Trident ST2 | 1.6 | 1.2 | |||
| Super Trident ST4 | 3.01 | 2.4 | |||||||
| Super Trident ST6 | 4.55 | 3.66 | |||||||
| Super Trident ST8 | 6.0 | 4.8 | |||||||
| Super Trident ST10 | 7.4 | 6.0 | |||||||
| Super Trident ST15 | 11.0 | 9.0 | |||||||
| Super Trident ST20 | 14.5 | 12.0 | |||||||
| Super Trident ST25 | 17.5 | 15.0 | |||||||
| Super Trident ST30 | 23.1 | 18.0 | |||||||
| Super Trident ST2A | 1.6 | 1.2 | |||||||
| Super Trident ST3A | 2.31 | 1.8 | |||||||
| Super Trident ST4A | 3.01 | 2.4 | |||||||
| Super Trident ST6A | 4.55 | 3.6 | |||||||
| Super Trident ST2N | 1.6 | 1.2 | |||||||
| Super Trident ST4N | 3.01 | 2.4 | |||||||
| Super Trident ST6N | 4.55 | 3.6 | |||||||
| Super Trident STBN | 6.0 | 4.8 | |||||||
| Super Trident ST10N | 7.4 | 6.0 | |||||||
| Super Trident STI 5N | 11.0 | 9.0 | |||||||
| Super Trident ST20N | 14.5 | 12.0 | |||||||
| Super Trident ST25N | 17.5 | 15.0 | |||||||
| Super Trident ST30N | 23.1 | 18.0 | |||||||
| Retro-fit Trident RT 20 | 1.6 | 1.2 | |||||||
| Retro-fit Trident RT 40 | 3.01 | 2.4 | |||||||
| Retro-fit Trident RT 60 | 4.55 | 3.6 | |||||||
| Retro-fit Trident RT 80 | 6.0 | 4.8 | |||||||
| 2 | Nissin Refrigeration and Engineering Ltd Osaka |
Marine Defecamat NST-20 | 1.2 | 0.27 | |||||
| Marine Defecamat NST-30 | 1.8 | 0.405 | |||||||
| Marine Defecamat NST-40 | 2.4 | 0.54 | |||||||
| NST-50 | 3.0 | 0.67 | |||||||
| NST-60 | 3.6 | 0.81 | |||||||
| NST-70 | 4.2 | 0.94 | |||||||
| NST-80 | 4.8 | 1.08 | |||||||
| NST-90 | 5.4 | 1.21 | |||||||
| NST-100 | 6.0 | 1.35 | |||||||
| NST-125 | 7.5 | 1.68 | |||||||
| NST-150 | 9.0 | 2.02 | |||||||
| NST-300 | 18.0 | 4.05 | |||||||
| NST-400 | 24.0 | 5.40 | |||||||
| NST-500 | 30.0 | 6.75 | |||||||
| NST-650 | 39.0 | 8.77 | |||||||
| NST-750 | 45.0 | 10.12 | |||||||
| Marine Defecamat NST-20H | 1.2 | 0.27 | |||||||
| Marine Defecamat NST-25H | 1.5 | 0.338 | |||||||
| Marine Defecamat NST-30H | 1.8 | 0.405 | |||||||
| Marine Defecamat NST-40H | 2.4 | 0.54 | |||||||
| 3 | Taiko Kikai Industries Co. Ltd 209 Shimotabuse Tabuse-cho Kamage-Gun Yamaguchi-Pref Japan 742-15 |
TAIKO SHIPCLEAN BFT 40 | 2.4 | 0.54 | |||||
| AP-2 SHIPCLEAN | 1.2 | 0.27 | |||||||
| AP-3 SHIPCLEAN | 1.8 | 0.405 | |||||||
| AP-4 SHIPCLEAN | 2.4 | 0.54 | |||||||
| AP-5 SHIPCLEAN | 3.0 | 0.675 | |||||||
| AP-6 SHIPCLEAN | 4.5 | 1.0125 | |||||||
| AP-7 SHIPCLEAN | 6.0 | 1.35 | |||||||
| SBT-15 | 0.9 | 0.2025 | |||||||
| SBT-25 | 1.5 | 0.3375 | |||||||
| SBT-40 | 2.4 | 0.54 | |||||||
| SBT-65 | 3.9 | 0.8775 | |||||||
| 4 | Goko Seisakusho Co. Ltd. 27-3, 5-chome Shimbashi Minato-ku Tokyo |
“AEROBICT C”TF 20 |
0.7 | 0.27 | |||||
“AEROBICT”TF 25 |
0.337 | ||||||||
| 1.0 | 1.6 | 0.540 | |||||||
“AEROBICT C”TF 40 |
0.6752.1 | ||||||||
“AEROBICT”TF 50 |
0.540 | 0.81 | |||||||
| 2.0 | 1.08 | ||||||||
“AEROBICT C”TF 60 |
|||||||||
“AEROBICT”TF 40 |
1.62 | 0.54 | |||||||
| 1.6 | |||||||||
“AEROBICT”TF 80 |
|||||||||
| 3.2 | |||||||||
| AEROBICT TF 120 | |||||||||
| 4.8 | |||||||||
| 5 | Nippon Kokan, Yokohama |
NKK-25 D II | 1.5 | 0.337 | |||||
| 6 | Japan Development Consultants Inc. 1 Tatagami-cho Sasebo-City Nagasaki |
CLEAN FRIEND BFM-35 | 2.13 | ||||||
| 11 | Netherlands | 1 | Holland Marine Services Amsterdam b.v Vlothavenweg 16, 1013 BJ Amsterdam, The Netherlands |
MSD-11 Series | 4.0 | 1.1 | |||
| 12 | Poland | 1 | Pomorskie Zaklady Urzadzen Okretowych “WARMA” 86-300 Grudziadz Ul. Lotnicza 21 |
LK-30A | 1.95 | 1.36 | |||
| LK-100 | 6.5 | 4.55 | |||||||
| LK-200 | 13.0 | 9.1 | |||||||
| LK-320 | 20.8 | 14.56 | |||||||
| LK-30 | 1.95 | 1.8 | |||||||
| LK-50 | 3.25 | 3.0 | |||||||
| LK-100 | 6.5 | 6.0 | |||||||
| LK-200 | 13.0 | 12.0 | |||||||
| LK-320 | 20.8 | 19.2 | |||||||
| MOS40 | 40.0 | 27.9 | |||||||
| MOS-2S | 2.5 | 1.75 | |||||||
| 2 | Centrum Techniki Morskie; OBR Gdansk, UI J. Matejki 6 |
TELKA 03 | 6.0 | 4.5 | |||||
| 3 | Stocznia Szezecinska Im. Adolfa Warskiego Szczecin |
B 430-7 | 1.3 | 0.9 | |||||
| 4 | Zaklady Doswiadczalno-Produkcyjnych “TECHMOR” ul. Marynarki Polskiej 59, Gdansk |
TELKA 06 | 12.0 | 9.0 | |||||
| 13 | Republic of Korea | 1 | Consolidated Machinery Inc. Yang San |
BIO AQUA 35 | 6.125 | 2.6 | |||
| BIO AQUA 25 | 4.375 | 1.86 | |||||||
| BIO AQUA 18 | 3.15 | 1.34 | |||||||
| BIO AQUA 55 | 9.625 | 4.125 | |||||||
| BIO AQUA 45 | 7.875 | 3.4 | |||||||
| AEROB-12 | 2.1 | 0.89 | |||||||
| AEROB-12C | 2.1 | 0.89 | |||||||
| AEROB-18 | 3.15 | 1.34 | |||||||
| AEROB-18C | 3.15 | 1.34 | |||||||
| AEROB-25 | 4.375 | 1.86 | |||||||
| AEROB-35 | 6.125 | 2.6 | |||||||
| AEROB-45 | 7.875 | 3.4 | |||||||
| AEROB-55 | 9.625 | 4.125 | |||||||
| 2 | HanDOk Precision Ind; Kangseo-Gu Seoul |
HDST –150 | 0.9 | ||||||
| HDST –250 | 1.5 | ||||||||
| HDST –400 | 2.4 | ||||||||
| HDST –650 | 3.9 | ||||||||
| 3 | Chang Won Environment Ind. Co. Ltd Kim hai Kyung Nam-Do |
SEACLEAN II-1OCE | 0.3 | ||||||
| SEACLEAN II-20CE | 0.6 | ||||||||
| SEACLEAN U-30CE | 0.9 | ||||||||
| SEACLEAN U-50CE | 1.5 | ||||||||
| SEACLEAN’ II-150CE | 4.5 | ||||||||
| SEACLEAN II-30CE-S | 0.9 | ||||||||
| SEACLEAN II-50CE-S | 1.5 | ||||||||
| SEACLEAN II-50CE(B) | 2.4 | ||||||||
| SEACLEAN II-50CE(B | 2.4 | ||||||||
| SEACLEAN II-100CE | 3.0 | ||||||||
| SEACLEAN II-100CE-S | 3.0 | ||||||||
| SEACLEAN II-150CE-S | 4.5 | ||||||||
| SEACLEAN II-300CE | 9.0 | ||||||||
| 4 | Changkwang Engineering Co., Ltd Youngdeungpo-Ga, Seoul |
HDST-150 | 0.9 | ||||||
| HDST-250 | 1.5 | ||||||||
| HDST-400 | 2.4 | ||||||||
| HDST-650 | 3.9 | ||||||||
| 14 | Russian Federation | 1 | Sudoimport Moskva Smolenskaia - Sennaia pl 32/34 |
EOS-15 | 15.0 | 6.0 | |||
| EOS-5 | 5.0 | 2.5 | |||||||
| 2 |
“EKOS Ltd” Barrikadnaija st. 36, fl. 8 St. Petersburg |
STOK-IOMI | 10.0 | 5.0 | |||||
| STOK-50M | 50.0 | 25.0 | |||||||
| 3 | Krasnoputilovskai St 55-6 198152 St. Petersburg |
STOK-30M | 30.0 | 15.0 | |||||
| STOK-70M | 70.0 | 35.0 | |||||||
| 15 | Spain | 1 | DETEGASA Ctra. Castro-Meiras 15550 Valdovino La Coruna |
PHYSICAL- CHEMICAL | |||||
| DELTA FQ-6 | 6.0 | 3.3 | |||||||
| DELTA FQ-10 | 10.0 | 5.5 | |||||||
| DELTA FQ-15 | 15.24 | 8.3 | |||||||
| DELTA FQ-22 | 22.0 | 12.1 | |||||||
| DELTA FQ-24 | 24.0 | 13.2 | |||||||
| DELTA FQ-28 | 28.0 | 15.4 | |||||||
| DELTA FQ-30 | 30.3 | 16.6 | |||||||
| DELTA FQ-36 | 36.0 | 19.8 | |||||||
| DELTA FQ-40 | 40.0 | 22.0 | |||||||
| DELTA FQ-50 | 50.0 | 27.5 | |||||||
| DELTA FQ-88 | 88.5 | 48.6 | |||||||
| DELTA FQ-105 | 105.0 | 57.5 | |||||||
| DELTA FQ-125 | 125.0 | 68.75 | |||||||
| BIOLOGICAL | |||||||||
| DELTA PR-036 | 0.36 | 0.19 | |||||||
| DELTA PR-069 | 0.69 | 0.38 | |||||||
| DELTA PR-138 | 1.38 | 0.75 | |||||||
| DELTA PR-200 | 2.0 | 1.10 | |||||||
| DELTA PR–260 | 2.6 | 1.43 | |||||||
| DELTA PR-400 | 4.0 | 2.2 | |||||||
| DELTA PR-540 | 5.40 | 2.97 | |||||||
| DELTA PR-670 | 6.70 | 3.68 | |||||||
| DELTA PR-870 | 8.70 | 4.78 | |||||||
| DELTA PR-1000 | 10.0 | 5.50 | |||||||
| DELTA PR-1310 | 13.10 | 7.20 | |||||||
| DELTA PR-1590 | 15.90 | 8.74 | |||||||
| DELTA PR-2110 | 21.10 | 11.60 | |||||||
| DELTA PR-2600 | 26.0 | 14.30 | |||||||
| DELTA PR-3480 | 34.80 | 19.14 | |||||||
| DELTA PR-4392 | 43.92 | 24.15 | |||||||
| 16 | Sweden | 1 | Consilium Marine, Stockholm Sweden S-17122 Solna |
NEPTUMATIC MOC-12 | 12.0 | 6.2 | |||
| NEPTUMATIC MOC-20 | 20.0 | 10.3 | |||||||
| NEPTUMATIC MOC-28 | 28.0 | 14.4 | |||||||
| NEPTUMATIC MOC-28R | 21.0 | 10.6 | |||||||
| NEPTUMATIC MOC-75 | 75.0 | 30.0 | |||||||
| NEPTUMATIC MOC-75 Compart | 75.0 | 30.0 | |||||||
| NEPTUMATIC MOC-100 | 100.0 | 40.0 | |||||||
| NEPTUMATIC MOC-125 - | 125.0 | 50.0 | |||||||
| NEPTUMATIC MOC-130 | 130.0 | 52.0 | |||||||
| NEPTUMATIC RETRO-30 | 30.0 | 15.4 | |||||||
| NEPTUMATIC RETRO-45 | 45.0 | 23.2 | |||||||
| NEPTUMATIC MOD 130 | 130.0 | 52.0 | |||||||
| 17 | United Kingdom | 1 | Hamworthy Engineering Ltd, Pump and Compressor Division Fleets Corner Poole, Dorset BH17 7LA |
Retro-fit Trident RT 80 | 6.0 | 4.8 | |||
| Retro-fit Trident RT 60 | 4.55 | 3.6 | |||||||
| Retro-fit Trident RT 40 | 3.01 | 2.4 | |||||||
| Retro-fit Trident RT 20 | 1.6 | 1.2 | |||||||
| Super Trident ST 60 | 46.2 | 36.0 | |||||||
| Super Trident ST 50 | 30.0 | 36.75 | |||||||
| Super Trident ST 40 | 24.0 | 28.0 | |||||||
| Super Trident ST 40X | 28.0 | 24.0 | |||||||
| Super Trident ST 30 | 23.1 | 18.0 | |||||||
| Super Trident ST 25X | 17.5 | 15.0 | |||||||
| Super Trident ST 25 | 17.5 | 15.0 | |||||||
| Super Trident ST 20 | 14.5 | 12.0 | |||||||
| Super Trident ST 15 | 11.0 | 9.0 | |||||||
| Super Trident ST 13 | 9.6 | 7.8 | |||||||
| Super Trident ST 10 | 7.4 | 6.0 | |||||||
| Super Trident STS | 6.0 | 4.8 | |||||||
| Super Trident ST 6 | 4.55 | 3.6 | |||||||
| Super Trident ST 4 | 3.01 | 2.4 | |||||||
| Super Trident ST 3 | 2.1 | 1.8 | |||||||
| Super Trident ST 2 | 1.6 | 1.2 | |||||||
| Super Trident ST i | 0.8 | 0.6 | |||||||
| Super Trident ST O | 0.45 | 0.32 | |||||||
| Super Trident ST 60S | 46.2 | 36.0 | |||||||
| Trident T 10 | 0.68 | 0.6 | |||||||
| Trident T 20 | 1.36 | 1.2 | |||||||
| Trident T 30 | 2.04 | 1.8 | |||||||
| Trident T 40 | 2.73 | 2.4 | |||||||
| Trident T 50 | 3.41 | 3.0 | |||||||
| Trident T O | 4.09 | 3.6 | |||||||
| Trident T 75 | 5.11 | 4.5 | |||||||
| Trident T 100 | 6.81 | 6.0 | |||||||
| Super Trident | |||||||||
| ST-OA | 0.42 | 0.35 | |||||||
| ST-IA | 0.8 | 0.6 | |||||||
| ST-2A | 1.6 | 1.2 | |||||||
| ST 3A | 2.31 | 1.8 | |||||||
| ST-4A | 3.0 | 2.4 | |||||||
| ST-6A | 4.55 | 3.6 | |||||||
| ST-8A | 6.0 | 4.8 | |||||||
| 2 | Marine Ventures Ltd Marven House, 1 Field Road, Reading RG1 6AP England |
SEACARE 10 | 1.0 | 0.6 | |||||
| SEACARE 40 | 4.0 | 2.4 | |||||||
| SEACARE 200 | 20.0 | 12.0 | |||||||
| 3 | Elsan Marine International Ltd Sandwich Kent |
STOUR LC 5 | 0.18 | 0.3 | |||||
| STOUR LC 10 | 0.36 | 0.6 | |||||||
| STOUR LC 20 | 0.72 | 12.0 | |||||||
| STOUR LC 35 | 1.26 | 2.1 | |||||||
| STOUR LC 60 | 2.16 | 3.6 | |||||||
| STOUR LC 100 | 36.0 | 0.0 | |||||||
| 18 | United States | 1 | Exstar International Corp., 6502 Windmill Way, Wilmington, North Carolina 28405 |
MARLAND SANI-SYSTEM: | |||||
| SS-645 Type II | 17.4 | 13.5 | |||||||
| SS-630 Type II | 11.36 | 9.0 | |||||||
| SS-615 Type II | 5.11 | 4.05 | |||||||
| SS-600 Type II | 2.84 | 2.25 | |||||||
| SS 40 | |||||||||
| SS 60 | |||||||||
| SS 600 | 2.84 | 2.25 | |||||||
| SS 615 | 5.11 | 4.05 | |||||||
| 2 | Microphor Inc. Willits California |
M 8 | |||||||
| M 10 | |||||||||
| M 12 | |||||||||
| M 14 | |||||||||
| M30 | 0.057 | 0.18 | |||||||
| M 40 | 0.076 | 0.24 | |||||||
| M 50 | 0.095 | 0.3 | |||||||
| M-100 | 0.189 | 0.6 | |||||||
| M 150 | 0.284 | 0.9 | |||||||
| M 200 | 0.379 | 1.2 | |||||||
| M 300 | 0.568 | 1.8 | |||||||
| M 500 | 0.946 | 3.0 | |||||||
| M 600 | 1.136 | 3.6 | |||||||
| M 800 | 1.514 | 4.8 | |||||||
| M 1000 | 1.893 | 6.0 | |||||||
| MC 50 | 0.473 | 0.3 | |||||||
| MC 100 | 0.946 | 0.6 | |||||||
| MC 150 | 1.419 | 0.9 | |||||||
| MC 200 | 1.893 | 1.2 | |||||||
| MC 300 | 2.839 | 1.8 | |||||||
| MC 500 | 4.731 | 3.0 | |||||||
| MC 600 | 5.678 | 3.6 | |||||||
| MC 800 | 7.57 | 4.8 | |||||||
| MC 1000 | 9.463 | 6.0 | |||||||
| 3 | St. Louis Ship. 611 East Marceau Street St. Louis Missouri 63111 |
“FAST”LS-1 |
0.57 | 0.17 | |||||
“FAST”LS-2 |
0.91 | 0.27 | |||||||
“FAST”6m |
1.02 | 0.31 | |||||||
“FAST”LS-3 |
1.36 | 0.41 | |||||||
“FAST”9M |
1.59 | 0.48 | |||||||
“FAST”13M |
2.39 | 0.71 | |||||||
“FAST”12D |
2.61 | 0.78 | |||||||
“FAST”18M |
3.18 | 0.95 | |||||||
“FAST”18D |
3.86 | 1.15 | |||||||
“FAST”26M |
4.77 | 1.43 | |||||||
“FAST”25D |
5.68 | 1.70 | |||||||
“FAST”40D |
8.41 | 2.51 | |||||||
“FAST”50D |
10.70 | 3.19 | |||||||
“FAST”D6 |
|||||||||
“FAST”D8 |
|||||||||
| 4 | FAST Systems, Inc. St. Louis, Missouri 63110 |
“FAST”DI, DIM |
3.52 | ||||||
“FAST”D2, D2M |
5.22 | ||||||||
“FAST”D3, D3M |
7.72 | ||||||||
“FAST”D4, D4M |
11.35 | ||||||||
“FAST”D5, DSM |
14.42 | ||||||||
“FAST”D6, D6M |
19.98 | ||||||||
“FAST”D7, D7M |
29.97 | ||||||||
“FAST”D8, D8M |
46.89 | ||||||||
“FAST”D9, D9M |
67.67 | ||||||||
“FAST”M1 |
1.13 | ||||||||
“FAST”M2 |
1.70 | ||||||||
“FAST”M3 |
2.49 | ||||||||
“FAST”M4 |
3.29 | ||||||||
“FAST”MS |
4.88 | ||||||||
| 5 | Sigma Treatment Systems Inc., 2 Davis Ave Frazer Pennsylvania 19355 USA (Manor Welding and Fabrication Co. Ltd, 4-5 Wainman Rd., Woodston Peterborough PE2 OBU England) |
BIO-STS 500 | 1.89 | 1.67 | |||||
| BIO-STS 1500 | 5.68 | 5.0 | |||||||
| BIO-STS 1000 | 3.79 | 3.33 | |||||||
| 6 | Houston Systems Manufacturing Co. New Iberia, LA |
“HELI-FLOW”HF 5M |
0.38 | 0.3 | |||||
“HELI-FLOW”BF 10M |
0.76 | 0.6 | |||||||
“HELI-FLOW”BF 13M |
0.98 | 0.78 | |||||||
“HELI-FLOW”HF 19M |
1.42 | 1.14 | |||||||
“HELI-FLOW”HT 26M |
1.97 | 1.56 | |||||||
“HELI-FLOW”HF 32M |
2.42 | 1.92 | |||||||
“HELI-FLOW”HF 41 M |
3.10 | 2.46 | |||||||
“HELI-FLOW”HF 58M |
4.39 | 3.48 | |||||||
“HELI-FLOW”HF 71 M |
5.38 | 4.26 | |||||||
“HELI-FLOW”HF 84M |
6.36 | 5.04 | |||||||
“HELI-FLOW”HF 104M |
7.87 | 6.24 | |||||||
“HELI-FLOW”HF 130M |
9.84 | 7.8 | |||||||
“HELI-FLOW”HF 156M |
11.81 | 9.36 | |||||||
“HELI-FLOW”HF 175M |
13.24 | 10.5 | |||||||
“HELI-FLOW”HF 188M |
14.23 | 11.28 | |||||||
“HELI-FLOW”HF 208M |
15.75 | 12.48 | |||||||
“HELI-FLOW”HF 234M |
17.72 | 14.04 | |||||||
“HELI-FLOW”HF 292M |
22.11 | 17.52 | |||||||
“HELI-FLOW”HF 325M |
24.61 | 19.5 | |||||||
“HELI-FLOW”HF 357M |
27.03 | 21.42 | |||||||
“HELM-FLOW”HF 390M |
29.53 | 23.4 | |||||||
“HELI-FLOW”HF 455M |
34.45 | 27.3 | |||||||
| 7 | Red Fox Industries Inc. New Iberia LA |
RF-100-M | 0.38 | 0.3 | |||||
| RF-200-M | 0.76 | 0.6 | |||||||
| RF-350-M | 1.33 | 1.05 | |||||||
| RF-500-M | 1.9 | 2.00 | |||||||
| RF-750-M | 2.9 | 3.00 | |||||||
| RF-1000-M | 3.79 | 4.00 | |||||||
| RF-1500-M | 5.7 | 6.00 | |||||||
| RF-2000-M | 7.6 | 8.00 | |||||||
| RF-2500-M | 9.5 | 10.00 | |||||||
| RF-3000-M | 11.4 | 12.00 | |||||||
| RF-3500-M | 13.3 | 14.00 | |||||||
| RF-4000-M | 15.2 | 16.00 | |||||||
| RF-4500-M | 17.1 | 18.00 | |||||||
| RF-5000-M | 19.0 | 20.00 | |||||||
| RF-5500-M | 20.9 | 22.00 | |||||||
| RF-6000-M | 22.8 | 24.00 | |||||||
| RF-7500-M | 28.5 | 30.00 | |||||||
| RF-9000-M | 34.2 | 36.00 | |||||||
| RF-0.5-MP | 0.61 | 0.48 | |||||||
| (Little Fox) | |||||||||
| PAC FP 50 | 0.19 | 0.3 | |||||||
| PAC FP 200 | 0.76 | 0.6 | |||||||
| PAC FP 500 | 1.89 | 1.5 | |||||||
| PAC FP 750 | 2.84 | 2.25 | |||||||
| PAC FP 1000 | 3.79 | 3.0 | |||||||
| PAC FP 1500 | 5.68 | 4.5 | |||||||
| PAC FP 2000 | 7.57 | 6.0 | |||||||
| PAC FP 2500 | 9.40 | 7.5 | |||||||
| 8 | Effluent Technology Corporation 402 Tacoma Ave. S P.O. Box 2094 Tacoma WA 98401 |
“ORCA”MK 2/12 |
1.36 | 1.44 | |||||
“ORCA”MK 2/24 |
2.73 | 2.88 | |||||||
“ORCA”MK 2/36 |
4.09 | 4.32 | |||||||
| 9 | KIMCO Inc. P.O. Box 1551 Houston, TX 77251 |
HF 2M | — | — | |||||
| HF SM | 0.38 | 0.3 | |||||||
| HF 1OM | 0.76 | 0.6 | |||||||
| HF 13M | 0.98 | 0.78 | |||||||
| HF 19M | 1.42 | 1.14 | |||||||
| HF 26M | 1.97 | 1.56 | |||||||
| HF 32M | 2.42 | 1.92 | |||||||
| HF 41M | 3.10 | 2.46 | |||||||
| HF 58M | 4.39 | 3.48 | |||||||
| HF 71M | 5.38 | 4.26 | |||||||
| HF 84M | 6.36 | 5.04 | |||||||
| HF 104M | 7.87 | 6.24 | |||||||
| HF 130M | 9.84 | 7.8 | |||||||
| HF 156M | 11.81 | 9.36 | |||||||
| HF 175M | 13.24 | 10.5 | |||||||
| HF 188M | 14.23 | 11.28 | |||||||
| HF 208M | 15.75 | 12.48 | |||||||
| HF 234M | 17.72 | 14.04 | |||||||
| HF 292M | 22.11 | 17.52 | |||||||
| HF 325M | 24.61 | 19.5 | |||||||
| HF 357M | 27.03 | 21.42 | |||||||
| HF 390M | 29.53 | 23.4 | |||||||
| HF 455M | 34.45 | 27.3 | |||||||
| 10 | OMNIPURE WASTEWATER TREATMENT 8623 Windswept Houston, Texas |
“OMNIPURE”4M |
1.48 | 0.78 | |||||
“OMNIPURE”6M |
2.96 | 1.62 | |||||||
“OMNIPURE”8M |
6.815 | 3.6 | |||||||
“OMNIPURE”12M |
13.63 | 7.2 | |||||||
“OMNIPURE”12MX |
28.39 | 15.0 | |||||||
| 11 | EES Corporation 12850 Bournewood Drive, Sugarland, Texas 77478 |
“OMNIPURE”I SMX |
56.00 | 30.0 | |||||
| 12 | Envirovac Inc. 1260 Turret Drive Rockford IL 61111 |
ORCA II-12 | 1.36 | 1.44 | |||||
| ORCA IIA-12 | 1.36 | 1.44 | |||||||
| ORCA II-24 | 2.72 | 2.88 | |||||||
| ORCA IIA-24 | 2.72 | 2.88 | |||||||
| ORCA II-36 | 4.09 | 4.32 | |||||||
| ORCA IIA-36 | 4.09 | 4.32 | |||||||
| ORCA II-160 | 18.17 | 19.2 | |||||||
| ORCA II-165 | 18.93 | 19.8 | |||||||
| ORCA II-330 | 37.47 | 39.6 | |||||||
| ORCA II-360 | 37.47 | 39.6 | |||||||
| ORCA II-500 | 56.81 | 60.0 | |||||||
| ORCA IIA-12 | 1.36 | 1.44 | |||||||
| ORCA IIA-24 | 2.73 | 2.88 | |||||||
| ORCA IIA-36 | 4.09 | 4.32 | |||||||
| 13 | Exceltec International Corp. 1110 Industrial Drive Sugarland Texas 77478 |
Omnipure 6MC | 3.0 | 1.62 | |||||
| Omnipute 7MC | 4.5 | 2.4 | |||||||
| Omnipure 8MC | 7.0 | 3.6 | |||||||
| Omnipure 12MC | 14.0 | 7.2 | |||||||
| Omnipure 12MX | 28.0 | 15.0 | |||||||
| Omnipure 15MX | 56.0 | 30.0 | |||||||
Schedule 6 |
Schedule 6: added, on 1 July 2002, by regulation 7(b) of the Resource Management (Marine Pollution) Amendment Regulations 2002 (SR 2002/99).
Any system that, when tested under International Maritime Organisation Resolution MEPC.2(VI), meets, or exceeds, the following standards:
(a) a faecal coliform standard where the geometric mean of the faecal coliform count does not exceed 250 faecal coliforms per 100 millilitres of water; and
-
(b) a suspended solids standard where the geometric mean of the total suspended solids content, when suspended solids are analysed by gravimetric methods, does not exceed—
(i) 50 milligrams per litre of water when analysed on shore; or
(ii) 100 milligrams per litre of water more than the suspended solids content of the ambient water used for flushing when analysed on board a ship; and
(c) a biochemical oxygen demand count where the geometric mean of 5-day biochemical oxygen demand of the samples of sewage does not exceed 50 milligrams per litre of water.
Schedule 7 |
Schedule 7: added, on 1 July 2002, by regulation 7(c) of the Resource Management (Marine Pollution) Amendment Regulations 2002 (SR 2002/99).
(Approved in accordance with the United States of America Environmental Protection Agency Federal Water Pollution Control Act, 33 U.S.C. 1322, Part 159—Marine Sanitation Devices as Type 1)
| Manufacturing countries | Manufactured by | Type and model | Approximate designed hydraulic loading (m3/day) | ||
|---|---|---|---|---|---|
| United States | Galley Maid Marine Products, Inc PO Box 10417 Rivera Beach Florida 33404 |
Delta Marine Head | 2.2 | ||
| Central Waste Treatment System | 1.5 | ||||
| Raritan Engineering Company, Inc 530 Orange Street PO Box 1157 Millville New Jersey 08332 |
Lectra/San MC | 2.7 | |||
| Purasan PST | 2.2 | ||||
| Sealand Technology, Inc Fourth Street PO Box 38 Big Prairie Ohio 4461 |
Saanx One | 2.2 |
Marie Shroff,
Clerk of the Executive Council.
Date of notification in Gazette: 23 July 1998.
Contents
1General
2Status of reprints
3How reprints are prepared
4Changes made under section 17C of the Acts and Regulations Publication Act 1989
5List of amendments incorporated in this reprint (most recent first)
Notes
1 General
-
This is a reprint of the Resource Management (Marine Pollution) Regulations 1998. The reprint incorporates all the amendments to the regulations as at 1 July 2005, as specified in the list of amendments at the end of these notes.
Relevant provisions of any amending enactments that contain transitional, savings, or application provisions that cannot be compiled in the reprint are also included, after the principal enactment, in chronological order. For more information, see http://www.pco.parliament.govt.nz/reprints/
.
2 Status of reprints
-
Under section 16D of the Acts and Regulations Publication Act 1989, reprints are presumed to correctly state, as at the date of the reprint, the law enacted by the principal enactment and by the amendments to that enactment. This presumption applies even though editorial changes authorised by section 17C of the Acts and Regulations Publication Act 1989 have been made in the reprint.
This presumption may be rebutted by producing the official volumes of statutes or statutory regulations in which the principal enactment and its amendments are contained.
3 How reprints are prepared
A number of editorial conventions are followed in the preparation of reprints. For example, the enacting words are not included in Acts, and provisions that are repealed or revoked are omitted. For a detailed list of the editorial conventions, see http://www.pco.parliament.govt.nz/editorial-conventions/
or Part 8 of the Tables of New Zealand Acts and Ordinances and Statutory Regulations and Deemed Regulations in Force.
4 Changes made under section 17C of the Acts and Regulations Publication Act 1989
-
Section 17C of the Acts and Regulations Publication Act 1989 authorises the making of editorial changes in a reprint as set out in sections 17D and 17E of that Act so that, to the extent permitted, the format and style of the reprinted enactment is consistent with current legislative drafting practice. Changes that would alter the effect of the legislation are not permitted.
A new format of legislation was introduced on 1 January 2000. Changes to legislative drafting style have also been made since 1997, and are ongoing. To the extent permitted by section 17C of the Acts and Regulations Publication Act 1989, all legislation reprinted after 1 January 2000 is in the new format for legislation and reflects current drafting practice at the time of the reprint.
In outline, the editorial changes made in reprints under the authority of section 17C of the Acts and Regulations Publication Act 1989 are set out below, and they have been applied, where relevant, in the preparation of this reprint:
•omission of unnecessary referential words (such as
“of this section”
and“of this Act”
)•typeface and type size (Times Roman, generally in 11.5 point)
-
•layout of provisions, including:
•indentation
•position of section headings (eg, the number and heading now appear above the section)
•format of definitions (eg, the defined term now appears in bold type, without quotation marks)
•format of dates (eg, a date formerly expressed as
“the 1st day of January 1999”
is now expressed as“1 January 1999”
)•position of the date of assent (it now appears on the front page of each Act)
•punctuation (eg, colons are not used after definitions)
•Parts numbered with roman numerals are replaced with arabic numerals, and all cross-references are changed accordingly
-
•case and appearance of letters and words, including:
•format of headings (eg, headings where each word formerly appeared with an initial capital letter followed by small capital letters are amended so that the heading appears in bold, with only the first word (and any proper nouns) appearing with an initial capital letter)
•small capital letters in section and subsection references are now capital letters
•schedules are renumbered (eg, Schedule 1 replaces First Schedule), and all cross-references are changed accordingly
•running heads (the information that appears at the top of each page)
•format of two-column schedules of consequential amendments, and schedules of repeals (eg, they are rearranged into alphabetical order, rather than chronological).
5 List of amendments incorporated in this reprint (most recent first)
-
Maritime Transport Amendment Act 2004 (2004 No 98): section 11(4)
Resource Management (Marine Pollution) Amendment Regulations 2002 (SR 2002/99)